|
We are the leading manufacturer of pocket instruments which are made by using superior quality of raw materials and are available at very reasonable prices all across the globe to our clients. It is known for its durability and reliability. It is economical and very safe to use. It is secure, effective and efficient.
|
 | Senz PH Tester | | |
| Products name: pocket PH meter
Model: Senz PH tester
Application
• Water test
• Pool & spa health check
• Food / dairy production
• Chemical & waste disposal
• Brewery process
Specification
| Measuring Range | 0.0 to 4.0pH | | Resolution | 0.1pH | | Accuracy | ±0.2pH | | Battery | 4x1 .5V Buttoncell (Alkaline A7 or equivalent) | | Battery Life | Approx. 150Hours (continuous use) | | Auto Shut-off | Approx.15 minutes | | Product Life | 355Tests | | Operating Temperature | 0°C to 50°C | | Case Material | High Impact ABS plastic | | Dimension | 170 X 32 X 15mm | | Weight | Approx.70gm |
Features :
• Ruggedness : Its ruggedness is unmatched by any similar pocket size tester. The uniquely re-enforced glass sensor is made to withstand accidental drop and shocks. The tester is also water resistant and it floats.
• One-touch Calibration : On activation, the Tester recognizes pH buffers at 7.4 or 10 and calibration the endpoint reading automatically.
• Hold Function: Able to freeze display for ease of reading and recording.
• AutoEnd-point: The Auto End-point eliminates guesswork! With the auto-lock feature enabled, the tester automatically senses a stable end-point reading and freezes it for recording.
• BeepFunction: The tester beeps at every press of the button and beeps on every completed function and end-point reading.
For more details, click the given below attachment.
|
| Pocket PH Meter | | |
| It is Simple, in expensive pocket PH tester
pHep* Family features a casing that is rugged and ergonomically enhanced to fit your hand.
the design of these testers also features a larger LCD so measurements are easier to read from any angle.
Each instrument in the pHep* family comes with a prtetive cap that can be used as a measurement vessel.
With the latest innovation of a nonclagging fiber junction the new pHep* meters last much longer. You can simply pull out 1-2mm(1/8") of the junction fiber to completely renew it.
These testers are standard in qucik, on-the - spot pH testing.
Specifications:
Range : 0.0 to 14.0pH
Resoultion : 0.1pH
Accuracy ±0.1pH
Calibration Manual 2 points
Environment 0 to 50ºC(32 to 122ºF); RH max 95%
Dimensions 175X41X23mm
Battery 4 X 1.5V
WEight 78gms
| Range | 0.0 to 14.0pH | | Resoultion | 0.1pH | | Accuracy | ±0.1pH | | Calibration | Manual 2 points | | Environment | 0 to 50ºC(32 to 122ºF);RH max 95% | | Dimensions | 175X41X23mm | | Battery | 4 X 1.5V | | Weight | 78gms |
|
| Waterproof PH Meter | | |
| The PH ep®4 & 5 use the exclusive cartridge pH electrode. Electrode replacement with the stainless steel round connector means there are no pins to bend or break during replacement.
The PH ep®4 & 5 replaceable electrode has a pull - out cloth junction. When the cloth junction becomes dirty from routine testing. Simply pull out 3 mm(1/8") to rejuvenate the electrode.
The PH ep® 4 & 5 exposed temperature sensor provides fast response time, and its proximity to the pH electrode guarantees much more accurate temperature compensated reading.
Specifications:
| | HI 98127 (pHep® 4) | HI 98128 (pHep® 5) | | Range | -2.0 to 16.0 pH | -2.00 to 16.00 pH | | Resolution | 0.1 pH | 0.1 pH | | Accuracy | ± 0.1 | ± 0.05 pH | | Calibration | automatic, at 1 2 points with 2 sets of memorized buffers (pH .01/7.01/10.01 pH .01/6.86/9.18) | | Environment | 0 to 50°C (32 to 1°F); RH max 95% | | Dimensions | 163x40x26mm (6.4x1.6x1.0) | | Battery | 4 x 1.5V | | Weight | 100 gms |
|
| Water Hardness/Softness Tester | | |
| Test the hardness of water
The pNa is an easy-to-use and inexpensive instrument for
determining water hardness/softness. The hardness of water is
due to the presence of magnesium and calcium. These make
washing difficult, waste soap and create unpleasant scum and
scale deposits. With a zeolite system, the calcium and magnesium
ions are substituted on a one-to-one basis with sodium ions from
a conditioning resin. Once all the sodium ions are exhausted, the
resin has to be regenerated. This is currently determined by
estimating the volume of water that goes through the softener
and guessing when to change the resin!
Even though this may work in some cases, it fails in most since
the sodium content of feed water is never constant. As a result,
either the resin is regenerated too early and wastes resources, or too late, risking damage due to scaling. With the pNa, you can
measure the sodium content of feed water and exit water in
seconds. When the resin is exhausted of sodium, there will be no
exchange and the pNa will read the same value at the two ends.
Only then should the resin be changed.
pNa takes guess work out of resin regeneration!
|
| Water Purity Testers | | |
| Fast,on the spot tests for a wide variety of applications
Pure Water Test (PWT) enables you to check the purity of your distilled or demineralized water in laboratory or industrial environments. Ultra Pure Water (UPW) is an ideal tester for MΩ checksPWT is ideally suited for fields such as Printed Circuit Board washing, laundry,steam cleaning, checking car battery water and all areas where distilled,demineralized or pure water is used. UPW is the first pure water tester to measure in 1/1000ths of micro-Siemens (µS) andprovides on-the-spot and fast checks for
minute traces of contamination in your water.These testers are housed in a durable case that provides excellent protection against
harsh industrial environments. The casing also features a larger LCD than previous models and with a more ergonomic shape
is easier to handle.
|
| EC And TDS Testers | | |
| A smart, economical choice for spot EC and TDS measurements
DiST® testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS.
This popular line of dissolved solids testers have been redesigned to offer a host of improvements. The casing has been modified to provide increased strength, a better fit for holding
and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time. HI 98300, HI 98301 (DiST 1) and HI 98302 (DiST® 2) perform TDS measurements, while HI 98303 (DiST 3) and HI 98304
(DiST® 4) provide conductivity readings.
|
| EC/TDS/Temperature Testers | | |
| The original DiST*(dissolved solids tester)was first introduces in 1986 by HANNA.
We have always valued the comments and suggestions coming from our customers,so for this series, we have included all the features you have asked for and more!.The DiST®5 and DiST®6 include features such as: a replaceable graphite electrode, adjustable TDS ratio, temperature in °C or °F,automatic temperature compensation (ATC) with adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration. All of this in a floating, waterproof casing. This
3-in-1 tester is unmatched in EC/TDS/Temperature measurements.
|
| pH/Conductivity/TDS Testers | | |
| HI 98129 and HI 98130 are waterproof testers that offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements.These technologically advanced testers
have a replaceable pH electrode cartridge with an expendable cloth junction as wel as, an EC/TDS graphite electrode that
resists contamination by salts and other substances. This gives these meters an extended life. Your tester no longer needs
to be thrown away when the pH sensor is exhausted.
|
|
 Product
Showroom View all our products / services as a slide show. play now
|
