|
We are the leading manufacturer of transmitters and transducers which are made by using superior quality of raw materials and is available at very reasonable prices all across the globe to our clients. It is known for its durability and reliability. It is economical and very safe to use. It is secure, effective and efficient. It functions automatically.
|
 | Cables - HI 7854/1 | | |
| 3.0 mm (0.12’’) cable
with screw type connectors
| Part Number | Cable Length | | HI 7854/1 | 1 m (3.3’) | | HI 7854/10 | 10 m (33’) | | HI 7854/15 | 15 m (49.5’) | | HI 7854/3 | 3 m (9.9’) | | HI 7854/5 | 5 m (16.5’) |
|
| Cables - HI 7855/1 | | |
| 3.0 mm (0.12’’) cable
with screw type and BNC connectors
| Part Number | Cable Length | | HI 7855/1 | 1 m (3.3’) | | HI 7855/10 | 10 m (33’) | | HI 7855/15 | 15 m (49.5’) | | HI 7855/3 | 3 m (9.9’) | | HI 7855/5 | 5 m (16.5’) | |
| Cables - HI 7856/1 | | |
| 3.0 mm (0.12’’) cable
with screw type and DIN connectors
| Part Number | Cable Length | | HI 7856/1 | 1 m (3.3’) | | HI 7856/10 | 10 m (33’) | | HI 7856/15 | 15 m (49.5’) | | HI 7856/3 | 3 m (9.9’) | | HI 7856/5 | 5 m (16.5’) |
|
| Cables - HI 7857/1 | | |
| 3.0 mm (0.12’’) cable
with screw type and DIN connectors
| Part Number | Cable Length | | HI 7857/1 | 1 m (3.3’) | | HI 7857/10 | 10 m (33’) | | HI 7857/15 | 15 m (49.5’) | | HI 7857/3 | 3 m (9.9’) | | HI 7857/5 | 5 m (16.5’) | |
| Cables - HI 7858/1 | | |
| 3.0 mm (0.12’’) cable
with BNC and US standard connectors
| Part Number | Cable Length | | HI 7860/1 | 1 m (3.3’) | | HI 7860/10 | 10 m (33’) | | HI 7860/15 | 15 m (49.5’) | | HI 7860/3 | 3 m (9.9’) | | HI 7860/5 | 5 m (16.5’) | |
| Cables - HI 7861/1 | | |
| 3.0 mm (0.12’’) cable
with BNC and US Standard connectors
| Part Number | Cable Length | | HI 7861/1 | 1 m (3.3’) | | HI 7861/10 | 10 m (33’) | | HI 7861/15 | 15 m (49.5’) | | HI 7861/3 | 3 m (9.9’) | | HI 7861/5 | 5 m (16.5’) | |
| Cables - HI 778P/1 | | |
| 5.0 mm (0.2’’) cable
with screw type connectors
| Part Number | Cable Length | | HI 778P/1 | 1 m (3.3’) | | HI 778P/10 | 10 m (33’) | | HI 778P/15 | 15 m (49.5’) | | HI 778P/3 | 3 m (9.9’) | | HI 778P/5 | 5 m (16.5’) | |
| Solid State Electrodes | | |
| Solid state electrodes are available as both single half-cells or as combination electrodes complete with reference electrode. These electrodes incorporate a solid sensing surface made of compressed silver halides, or solid crystalline material. Hanna’s offering includes sensors for the determination of bromide, cadmium, chloride, cupric, cyanide, fluoride, iodide, lead and silver ions. Solid body construction is rugged for long life.
Theory: A solid state electrode develops a voltage due to ion-exchange occurring between the sample and the inorganic membrane. An equilibrium mechanism occurs due to the very limited solubility of the membrane material in the sample. |
| Liquid Membrane Electrodes | | |
| Liquid membrane electrodes are available as single half-cells or as combination electrodes complete with reference electrode. The sensing surfaces of these electrodes are comprised of a homogeneous polymer matrix containing organic ion-exchangers selective for the determined ion. These sensors incorporate easily replaceable membrane modules and are available for measurements of nitrate, potassium and calcium.
Theory: The potassium electrode was one of the earliest liquid membrane sensors developed of this type. The membrane is usually in the form of a thin disc of pvc impregnated with the antibiotic valinomycin. The exchanger, also known an ionophore, is a ring structure that fits potassium ions inside like a lock and key. This type of membrane is not as rugged as the solid state type so they are designed for easy replacement of the sensing module. |
| Gas Sensors | | |
| Gas sensors are combinatizon electrodes that detect dissolved gases in a solution. No external reference is required for these electrodes. The sensing element is separated from the sample solution by a gas permeable membrane. Hanna’s offering includes the hi 4101 ammonia electrode and the hi 4105 carbon dioxide electrode.
Theory: A gas sensor works due to the partial pressure of the measured gas in solution. The dissolved gas in the sample diffuses into the membrane and changes the ph in a thin film of unbuffered electrolyte on the surface of the internal ph sensor. Diffusion continues until the partial pressure of the sample and the thin film is the same. The ph change is proportional to the dissolved gas in the sample. |
| Reference And Combination Electrodes | | |
| Hanna’s reference electrode is used with our half-cell ise sensors to provide accurate and repeatable measurements. Hanna’s combination electrodes incorporate the measuring electrode with the reference making them ideal for field measurements. |
| Combination Electrodes | | |
| Combination electrodes include a sensor and reference electrode in a single electrode body. Our combination ion selective electrodes provide the same selectivity and response as our ise half- cells, but include our superior double junction reference into the same electrode body. Combination solid state electrodes have a built in solid state sensor and quick refillable reference electrode. Our liquid membrane and fluoride combination electrodes have replaceable module construction and the hanna double junction reference stability. |
| HANNA ISE Standards | | |
| Our wide selection of HANNA ISE standards are made and bottled in our own state-of-the-art solutions facility. ISE standards are required for direct and incremental measurement techniques and are available with certificate of analysis.
|
| Ionic Strength Adjusters (ISA) | | |
| HANNA ionic strength adjusters (ISA) are formulated to provide a constant ionic strength in sample and standards alike, thus permitting concentration rather than activity measurements to be made. In some cases ISA's adjust pH and eliminate matrix effects.
| Code | Description | Size | | HI 4000-00 | ISA for halide electrodes | 500 mL | | HI 4001-00 | Alkaline ISA for ammonia/cyanide | 500 mL | | HI 4004-00 | Calcium ISA | 500 mL | | HI 4005-00 | Carbon dioxide ISA | 500mL | | HI 4010-00 | TISAB II (for fluoride) | 500 mL | | HI 4010-05 | TISAB II (for fluoride) | 1 gallon | | HI 4010-06 | TISAB III concentrate (for fluori | de) 500 mL | | HI 4012-00 | Lead or sulfate ISA | 500 mL | | HI 4013-00 | Nitrate ISA | 500 mL | | HI 4013-06 | Nitrate interferent suppressent I | SA 500 mL | | HI 4014-00 | Potassium ISA | 500 mL | | HI 4015-00 | SAOB (sulfide antioxidant buffer) | 500 mL, 1pkg (2 components) | |
| HANNA Accessories | | |
| HANNA replacement parts and accessories keep your measurements fast and accurate.
| Code | Description | | HI 4000-50 | Liquid membrane sensor handle | | HI 4000-51 | Gas sensor replacement pH for Ammonia Sensor | | HI 4000-52 | Gas sensor membrane cap for Ammonia | | HI 4000-54 | Gas sensor replacement pH for Carbon Dioxide Sensor | | HI 4000-70 | Halide polishing strip | | HI 4001-51 | Ammonia membrane kit (20 loose) | | HI 4004-51 | Calcium module for half-cell | | HI 4104-51 | Calcium module for combination | | HI 4005-53 | Carbon dioxide membrane kit (3 caps) | | HI 4110-51 | Fluoride module for combination electrode | | HI 4013-53 | Nitrate module 3 pack for half-cell | | HI 4113-53 | Nitrate module 3 pack for combination | | HI 4014-51 | Potassium module for half-cell | | HI 4114-51 | Potassium module for combination | | HI 740155P | Capillary pipettes (20 pcs) | | HI 740159 | Plastic tweezers | |
| Custom-Made Solutions | | |
| Get the best out of your instruments using single-dose HANNA calibration and maintenance solutions. A wide range of solutions for pH, conductivity, TDS and cleaning is available in the form of practical 20 mL sachets.
Each sealed, light-tight sachet holds just the right amount of calibration solution ready for use.
Every time your instrument is calibrated using these HANNA sachets, it is like using a newly- opened bottle of solution. |
| pH And ORP Solutions | | |
| For those operators who request it, we provide standard solutions complete with certificate of analysis. These certificates are prepared against NIST standards to avoid any possible error in determining the actual pH value.
The use of these certified HANNA solutions adds a further factor of accuracy to your most critical measurements. The certificates show the date of production, batch number, accuracy rating and the expiration date.
All solutions belonging to the series HI 50xx and HI 60xx are provided with a certificate of analysis. The certified solutions belonging to the HI 70xx series are identified by the letter "C" at the end of the part number. |
| Material Safety Data Sheet | | |
| Material safety data sheets (MSDS) for each of the solutions included in the HANNA catalog can be |
| PH Technical Calibration Solutions | | |
| To obtain precise and valid pH measurements, the pH meter and pH electrode must be calibrated at a minimum of 2 different points, close to the value of the sample to be tested.
HANNA offers a complete range of pH buffer solutions, that will satisfy all your calibration needs and which have been extended with two additional lines: The HI 50xx series of technical buffer solutions (shown on these pages,) and the solutions with millesimal resolution, HI 60xx. |
| Technical Solutions For Each Point Of The PH Scale. | | |
| This complete scale of buffer solutions offers a higher degree of accuracy for pH measurements in specific areas of application, such as in monitoring the pH of must and wine. This line includes 13 solutions starting from a value of pH 1.00 up to pH 13.00 with an accuracy of ±0.01 pH, thus covering every point of the pH scale.
These solutions are dedicated to those applications that require extremely accurate pH monitoring, and are also available with certificate of analysis prepared by comparison against NIST standards.
Also available are solution bottles, that are colored according to a given standard calibration value: HI 5004-R (Red), HI 5007-G (Green) and HI 5010-V (Violet). |
| PH Technical Calibration Solutions | | |
| For the highest level of reliability of field instrumentation, technical solutions are also provided in convenient single-dose sachets. Calibration solution sachets are sold in boxes containing 10 or 25 pieces to satisfy requirements for daily use. |
| HANNA Combo Kits | | |
| Use our combination kits for easy ordering and reordering.
| Code | Solutions (Ph Value @25°C) | Bottle | | HI 54710 | pH 4.01, pH 7.01, pH 10.01 | (3) 500 mL | | HI 54710-10 | pH 4.01, pH 7.01, pH 10.01, HI 70300L | (4) 500 mL | | HI 54710-11 | pH 4.01, pH 7.01, pH 10.01, HI 70300L, HI 7061L | (5) 500 mL |
| pH 4.01, pH 7.01, pH 10.01, HI 70300L, |
| | HI 54710-12 |
| (6) 500 mL |
| HI 7061L, HI 7071L |
|
| pH 4.01, pH 7.01, pH 10.01, HI 70300L, |
| | HI 54710-13 |
| (6) 500 mL |
| HI 7061L, HI 7072L |
| |
| PH Millesimal Calibration Solutions | | |
| This line of buffers with millesimal accuracy (±0. 002 ph), hi 60xx, has been prepared to meet the increasing need for assured accuracy in ph measurements. Each bottle of the series hi 60xx is provided with a certificate of analysis, prepared by comparison with nist standards. |
| Millesimal Calibration Solution Sachets | | |
| This series is also available in handy sachets to perform accurate calibrations on-site or in the field. Single dose sachet solutions are safe, easy to carry and always fresh. |
| 1.68 Buffer Solution | | |
| Plating bath samples, food samples and waste samples are often acidic in nature. To increase accuracy of your measurment at lower ph, it is important to calibrate your electrode and meter at that ph also. Hanna ph 1. 68 buffer is available to fufill this requirement. Ph 1. 68 buffer solution allows you to calibrate your measurement system in the acid ph range and bracket your acidic samples by using a second value at 4 ph or near 7 ph.
Our millesimal series offers ±0. 002 certified accuracy and our hi 5016 technical grade solution offers ±0. 01 certified accuracy. Standard nist traceable (no certification included) 1. 68 ph buffer with ±0. 01 accuracy is available in two sizes. |
| 4.01 Buffer Solution | | |
| Buffer solutions are prepared according to precise formulas and are hanna standardized with a ph electrode and meter calibrated with nist standards. This buffer value is widely used in water purification plants, in the food industry and where ever the ph is expected to be slightly acidic.
All ph 4 solutions show batch number, expiration date and the correlation table between ph and temperature.
Certified buffers are available with our technical and millesimal series. Standard nist traceable (no certification included) 4. 01 ph buffer with ±0. 01 accuracy is available in several convenient sizes. |
| 6.86 Buffer Solution | | |
| Many of our latest portable and bench microprocessor instruments, may now be calibrated both with pH 6.86 or pH 7.01 buffers.
The HANNA range of pH 6.86 buffer solutions has been expanded and stability has been improved to match the stability of pH 7.
| Code | Ph Value @25°C | Size | Package | Fda Bottle | Certificate Of Analysis | | HI 7006/1G | 6.86 | 1 Gallon (3.78 L) | 1 bottle |
|
| | HI 7006/1L | 6.86 | 1L | 1 bottle |
|
| | HI 7006L | 6.86 | 500 mL | 1 bottle |
|
| | HI 7006L/C | 6.86 | 500 mL | 1 bottle |
| • | | HI 7006M | 6.86 | 250 mL | 1 bottle |
|
| | HI 8006/1L | 6.86 | 1L | 1 bottle | • |
| | HI 8006L | 6.86 | 500 mL | 1 bottle | • |
| | HI 8006L/C | 6.86 | 500 mL | 1 bottle | • | • | |
| PH Standard Calibration Solutions | | |
| To increase accuracy of your measurement in an alkaline environment, it is important to calibrate your electrode and meter in that pH range and to preferably bracket your sample values. HANNA offers both pH 9.18 buffer and 10.01 buffer to fulfill this requirement.
Our millesimal series offers ±0.002 pH certified accuracy. Our HI 5091 technical grade solution offers ±0.01 pH certified accuracy. Standard NIST traceable (no certification included) 9.18 pH buffer with ±0.01 pH accuracy is available in several size bottles. The label indicates the batch code, expiration data and pH/temperature correlation table. |
| 10.01 Buffer Solution | | |
| HANNA pH 10 buffers are carefully prepared using the highest quality ingredients available and are standardized with NIST references.
| Code | Ph Value @25°C | Size | Package | Certificate Of Analysis | | HI 70010C | 10.01 | 20 mL | 25 sachets | • | | HI 70010P | 10.01 | 20 mL | 25 sachets |
| | HI 70010P/5 | 10.01 | 20 mL | 500 sachets |
| | HI 770710C | 10.01 & 7. | 01 20 mL | 10 sachets (5) | • | | HI 770710P | 10.01 & 7. | 01 20 mL | 10 sachets (5) |
|
|
| General Cleaning | | |
| Clean the liquid junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy. Immerse the electrode in the proper cleaning solution for at least 15-20 minutes. HANNA offers a wide range of cleaning solutions, for general purpose and specific applications to dissolve many deposits from the electrode, and thus ensure correct measurements. |
| Turbidity Standard Solutions | | |
| The HANNA turbidity calibration solutions are referenced to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU. They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting.
| Code | Description | Package | | HI 93102-0 | AMCO-AEPA-1 Calibration Solution at 0 NTU | 30 mL bottle | | HI 93102-20 | AMCO-AEPA-1 Calibration Solution at 20 NTU | 30 mL bottle | | HI 93124-0 | Standard Solution at 0 EBC | 30 mL bottle | | HI 93124-1 | Standard Solution at 2.5 EBC | 30 mL bottle | | HI 93124-2 | Standard Solution at 125 EBC | 30 mL bottle | | HI 93703-0 | AMCO-AEPA-1 Calibration Solution at 0 FTU | 30 mL bottle | | HI 93703-05 | AMCO-AEPA-1 Calibration Solution at 500 FTU | 30 mL bottle | | HI 93703-10 | AMCO-AEPA-1 Calibration Solution at 10 FTU | 30 mL bottle | |
| Color Graphic Display Portable Meters | | |
| HANNA’s new HI 98188 graphic LCD portable meter with USP measures conductivity, resistivity, TDS, NaCl and temperature. This meter features Log-on-demand, auto-endpoint, Good Laboratory Practice (GLP) functions and PC compatibility via USB. Battery recharging is fast with the included inductive charger. |
| Precision Instruments For Lab And Field Applications. | | |
| Conductivity is a variable that is monitored in many fields such as the chemical industry and agriculture. Conductivity is a measurement of the amount of dissolved salts in a given liquid and is inversely proportional to resistance.
With conventional meters, conductivity is obtained by applying a voltage across two probes and measuring the conductance of the solution. Solutions with a high conductivity, produce a higher current. In order to keep a low current in a highly conductive solution, you would have to reduce the surface area of the probe or increase the distance between the poles. The dual-sensor method is suitable for solutions with low-medium conductivity. For this reason, different probes must be used for different ranges.
Only the 4-ring method can measure multiple ranges with a single meter and a single probe. The advantages of four-ring potentiometric method over the two-pole (amperometric) method are numerous, including a linear reading over a wide range, no polarization, no need for thorough cleaning, etc. HANNA was the world's first manufacturer to introduce the four-ring or potentiometric method of conductivity measurement with portable and bench meters.
HANNA offers a wide range of Potentiometric (4-ring) and Amperometric (two-pole) meters. You have a choice of multiple meters for TDS, conductivity and pH, as well as specific instruments made for boilers and agriculture. |
| Spot Check Directly In Soil With This Ultra Portable | | |
| The HI 98331 Soil Test™ is a special pocket tester designed to directly measure soil conductivity and temperature with an incorporated sensor in the penetration probe. |
| Advanced Bench Meter With An Extended Range | | |
| HI 4321 is a research-grade laboratory EC/resistivity/TDS/salinity bench meter with a backlit 240 x 320 dot-matrix color screen and millesimal measuring resolution. The HI 4321 features auto-recognition of probe type (2 or 4 ring and nominal cell constant) and has an extended range from 0.001 µS/cm to 1 S/cm. Users can choose from three different salinity scales (practical salinity, natural sea water and percent) and from two temperature compensation modes (linear and natural water). Temperature compensation can also be disabled for absolute conductivity measurements The enhanced warning system, including acoustic signals, is in place to alert users when measuring outside the calibration range. This system will remind the user when a new calibration is due. HI 4321 can be used to perform all 3 stages of USP <645> conductivity tests for water quality. The instrument provides clear directions on how to perform each testing stage, automatically
Features
• 240 x 320 dot matrix color display
• Logging and graphing capabilities
• USB and RS 232 for computer compatibility
• EC, resistivity, TDS and salinity ranges
• Auto recognition of probe type (2 or 4 ring, and
nominal cell constant)
|
| EC USP Mode | | |
| Hi 4521 and hi 4321 can be used hanna’s to perform all 3 stages of united states pharmacopeia testing requirements for water quality (usp 645).
The instruments give clear instructions on how to perform each stage and automatically check that the temperature, conductivity and stability are within usp limits.
Comprehensive results are shown for all stages on a single screen at the end of the test. Up to 200 reports can be saved for future recall. |
| EC/TDS/NaCl And PH/MV Meter | | |
| The HANNA HI 255 is a logging, microprocessor-based pH, ORP, Conductivity (EC), TDS, NaCl and temperature bench meter. A relative mV feature is also provided.
The conductivity measurements are compensated, manually or automatically, with the temperature sensor inside the conductivity probe. It is also possible to disable the temperature compensation and measure the actual conductivity.
The pH measurements are compensated for temperature effect manually or automatically with the HI 7662 temperature probe.
pH Calibration is possible with up to three points, using five memorized buffers (4.01, 6.86, 7.01, 9.18 and 10.01).
The autoranging feature of the EC and TDS functions automatically sets the instrument to the scale with the highest possible resolution.
The temperature coefficient is user selectable and the GLP feature provides a guarantee of data consistency.
An alarm time-out is available to alert the user that too much time has elapsed since last pH calibration.
The instrument can store data for later retrieval, at the user’s request.
Quick Results
This meter was designed to satisfy the requests of many production and quality control laboratories that need quick multiple parameter measurement results with a single precision instrument.
No Interference
The pH and conductivity circuits are electrically separated, so that it is not necessary for the two probes to be simultaneously immersed in the same solution. The conductivity probe will not interfere with your pH measurements and the response of the pH electrode is immediately stable.
With a built-in logging function, measurements are stored in non- volatile memory, and can be transferred to a PC through the RS232 serial port. In addition to these features, HI 255 contains GLP features that store the calibration and measurement data of any sample, to be displayed upon request.
|
| Auto-ranging EC, TDS, NaCl, Temperature Meter | | |
| 4 Parameters in one professional instrument
Hi 2300 performs ec, tds (total dissolved solids), percentage of nacl and °c measurements. The auto-ranging feature for ec and tds measurements sets the highest possible resolution automatically.
All measurements can be temperature compensated at 20 or 25°c. The automatic temperature compensation (atc) can also be disabled for measuring the actual conductivity and the compensation coefficient can be user selected. The stability indicator located on the lcd ensures accuracy.
Conductivity readings are performed by applying an alternate current to the 4-ring probe, which creates a variable voltage directy proportional to conductivity.
the glp feature allows users to store and recall data about system status.
To communicate with the pc use the (optional) hi 92000 communication software. This software provides an exclusive online guide of all the commands available and allows data printing, plotting and exporting.
Auto-ranging
The ec and tds scales are autoranging. The meter automatically
sets the scale with the highest possible resolution.
Temperature compensation
Three options of compensating temperature are available:
automatic (atc): the ec probe has a built-in temperature sensor which is used to automatically compensate the ec/tds reading (from -9. 9°c to 120. 0°c), using the selected reference temperature.
Manual (MTC): the temperature value, shown on the secondary lcd, can be manually set with the arrow keys. The compensation is referenced at the selected temperature. The “°c” tag blinks when this option is active.
No compensation (NOTC): the temperature value shown on the secondary lcd is not taken into account. The reading displayed on the primary lcd is the actual ec or tds value. The “°c” tag blinks when this option is active.
|
| Auto-ranging EC, TDS, NaCl, Temperature Meter | | |
| Good laboratory practice
Good laboratory practice (glp) is a set of functions that allows storage and retrieval of data regarding the status of the system. After a successful calibration, the meter automatically stores the date and time of calibration, the calibration solution used and the resulting cell constant value. All this information can be recalled by the user.
Data transfer to pc
Connect the meter to a pc through the rs232 serial port. Use the hi 920010 (9 to 9-pin) connection cable and hi 92000 windows® compatible software (optional).
• 4-ring ec probe with internal temperature sensor
• Automatic (atc), manual (mtc) or no temperature compensation (notc)
• Auto-ranging
• Good laboratory practice
• PC compatible
|
| EC And Resistivity Meter | | |
| HI 216 is a combination bench meter that can read conductivity in 4 different ranges and resistivity.
For conductivity measurements, the calibration is a simple 1 point procedure using the easy-to-operate front panel knob. The temperature coefficient can be adjusted from 0 to 2.5% by also using a knob on the front panel. The supplied EC probe does not require re-calibration when switching from one range to another. The 4-platinum-ring probe has a built-in temperature sensor that automatically compensates for temperature changes.
For resistivity measurements, the meter is factory calibrated and, if necessary, calibration can be adjusted. The HI 3316D resistivity probe is easy to clean and requires little maintenance. It also features a built-in temperature sensor to automatically compensate for temperature variations. The temperature coefficient is user selectable from 2 to 7%.
Both the EC and resistivity probes use the same DIN plug on the rear panel and the meter automatically recognizes which probe is connected.
|
| Conductivity Meters | | |
| EC 214 and EC 215 are bench top
Multi-range conductivity meters that are ideal for the laboratory. 4 measurement ranges ensure the highest resolution and precision for your measuring requirements. 1-point calibration is performed manually by adjusting a knob on the front of the meter.
With a user selectable temperature coefficient and a temperature sensor incorporated in the probe, temperature compensation is automatic for the EC 215. The temperature compensation for the EC 214 is manual and the temperature value is set with a knob.
Each model features a rugged probe with a 4-ring platinum sensor responds faster than conventional stainless steel probes. These probes can be used for measuring highly acidic or alkaline samples even at high temperatures.
In addition, the EC 215R model offers analog output of 0 to 5V that represents the full conductivity scale across all 4 ranges.
|
| Industrial Grade EC Meter With USP | | |
| HI 98188 waterproof, portable conductivity meter has an expanded conductivity range
from 0.001 µS/cm to 400 mS/cm, as well as resistivity and 3 salinity scales. This meter automatically recognizes the probe type (2 or 4-ring) and allows the user to adjust the nominal cell constant.
Choose from 7 memorized standards and obtain up to a 5-point calibration. For salinity (% range), HI 7037 standard allows you to make a 1-point calibration. Both linear and natural water temperature compensation are available and the reference temperature is user adjustable. Ten sets of measurement parameters (such as reference temperature, temperature compensation mode, TDS factor, calibration etc.) can be stored as a customized user profile and recalled for later use. HI 98188 is also USP <645> compliant with stages 1, 2 and 3.
Data may be captured by either the log-on-demand option (400 samples) or by interval logging (from 5 sec to 1 minute). Return to the lab and download all data to your PC with the USB connection and HANNA's HI 92000 software. A combination of dedicated and soft keys allows quick, intuitive operation in a choice of languages. Comprehensive GLP data is directly accessible by pressing the GLP key. At the touch of a button access the contextual Help Menu to obtain on-screen information and assistance about each feature.
Designed for field use, this instrument can be easily operated with one hand and is housed in a rugged carrying case. With an extended battery life of up to 100 hours, users are assured long operation time. The inductive charger can either be plugged into a standard 115V or 230V socket with the included adapter. |
| Rechargeable Batteries With Inductive Charger | | |
| These models have up to 100 hours of extended battery life to guarantee long operation in the field. When the batteries are low, you don’t have to worry about carrying a spare set with you—the batteries can be recharged with HANNA’s inductive charger. Simply leave the meter on the recharger for a few hours and you’re ready to go. The charger can be plugged into a standard 115V or 230V socket using the included HANNA adapter. |
| EC/TDS/NaCl/ C Meters | | |
| HI 9835 and HI 98360 are rugged waterproof conductivity meters that combine versatility, reliability and ease of use.
Hanna’s advanced probe design utilizes
4 rings. This design offers greater stability while increasing the range of measurable concentrations and temperature. The "Auto Endpoint" mode of the HI 98360 makes it the ideal instrument for field measurements. After entering this mode, the instrument will freeze stable readings automatically on the LCD for easy recording of measurements.
• Autoranging-8 EC and TDS ranges
• 4-ring, conductivity probe with
built-in temperature sensor
• ATC
|
| Portable Logging Conductivity Meters | | |
| HI 933300 and HI 933301 are versatile conductivity meters designed to bring lab-grade performance and accuracy anywhere in the plant or field.
HI 933300 and HI 933301 allows users to print a permanent, indisputable record of measurement data from the built-in printer. On-the-spot printing is ideal for record keeping, trouble shooting or compliance purposes. Printing intervals are user selectable from 1 to 180 minutes.
HI 933300 offers the benefit of logging and PC connectivity. While in logging mode, HI 933300 records conductivity and temperature measurements and can be printed immediately or at a later date. All stored data (up to 8000 measurements) can be transferred to a PC through the standard RS232 serial connection or through HANNA’s infrared adapter and Windows® compatible software.
With the included HI 76302W conductivity probe with 4-ring technology and built-in temperature sensor, HI 933300 and HI 933301 are able to perform advanced measurements with automatic temp- erature compensation.
• Plain paper roll printer
• PC compatible with optional
HI 92000 appication software
and HI 9200/9 connection
interface (HI 933300)
• Supplied with probe, paper rolls,
batteries and hard carrying case
|
| Direct Measurement Kit | | |
| HI 993310 is an instrument that has been specifically designed to address the need for correct and rapid conductivity measurements in soil and liquids. It is supplied with two probes: HI 76305 with a stainless steel, conical tip for direct soil measurement, and HI 76304 for fertilizer enriched solutions.
HI 993310 measures both the soil conductivity in EC (mS/cm) as well as salt activity (g/L). The different scales can be selected through two keys on the front panel and two separate LEDs indicate which parameter is being tested. In addition, HI 993310 is equipped with an alarm LED that automatically turns on if the soil is too dry or nutritive substances such as potassium or nitrogen are lacking.
Demineralized water can be added to the soil prior to proceeding with further tests.
Direct soil measurement is facilitated by the small diameter, stainless steel, pointed HI 76305 probe. Once inserted into the ground, the user simply waits until the meter displays the value read. |
| EC And TDS Meters | | |
| HI 9033 and HI 9034 have proven time and again to hold up under extended use in wet, humid and muddy conditions.
HI 9033 utilizes a single probe and performs conductivity readings in four ranges. This meter offers the advantage of measuring samples from deionized water to brine without having to switch or recalibrate the probe.
HI 9034 measures total dissolved solids (TDS) in three ranges and offers the highest accuracy when performing measurements in applications as diverse as HVAC, waste water treatment and reverse osmosis. All three ranges can be activated at the touch of a button without having to change the conductivity probe.
Both meters perform measurements with automatic temperature compensation which adjusts for the effects of temperature on the probe. These portable instruments also feature BEPS (Battery Error Prevention System) technology that switches the meter off when low battery power could affect the readings.
• Multiple conductivity ranges
• Rugged and built to last
• Automatic Temperature
Compensation
|
| Multi-range Conductivity Meters | | |
| HI 8633 and HI 8733 have been designed specifically for use in areas of production and quality control. It is often necessary to test samples ranging from deionized water to brine.
Using an amperometric system would require constant recalibration and probe changes, thus making the measurement process time consuming and burdensome. To solve this problem, HANNA has developed the HI 8633, which uses a 4- ring potentiometric probe. The rugged probe is made of PVC, which is ideal for indoor and outdoor measurements.
Using one point calibration, it is now possible to obtain accurate readings across a very wide range, from 0.1 to 199.9 mS/cm.
If the temperature of the solution fluctuates, HI 8733, with a built-in temperature sensor and Automatic Temperature Compensation, is the perfect instrument.
As an accessory, HI 721313 is available. The kit includes a rugged carrying case with a beaker, a calibration screwdriver and standardizing solution of 12880 µS/cm.
• Rugged probe for indoor/outdoor
measurements
• Allow for calibration across a
wide range
• Choose from automatic
(HI 8733) or manual (HI 8633)
temerature compensation
|
| EC And Resistivity Meter | | |
| Hi 87314 is a combination, portabl meter that can read conductivity in different ranges and resistivity. For conductivity measurements, th calibration is a simple 1 point procedur via a trimmer located in the batter compartment. The supplied probe doe not require recalibration when switchin from one range to another. The 4- rin (stainless-steel) probe has a built-i temperature sensor that automaticall compensates for temperature changes the temperature coefficient can b adjusted from 0 to 2. 5% using a knob o the front panel.
For resistivity measurements, the meter i factory calibrated and, if necessary calibration can be adjusted.
The hi 3316d resistivity probe is easy t clean and requires little maintenance. I also features a built-in temperatur sensor to automatically compensate fo temperature variations. The temperatur coefficient is user-selectable from 2 to 7% both probes use the same din plug on th top of the instrument, and the mete automatically recognizes which prob is connected.
The instrument can be powered by a 9 rechargeable battery. The hi 8731 utilizes an inductive system for batter recharge, ensuring a watertight seal wit no external contacts. The battery can b recharged using the hi 710040 batter charger (optional) without needing t open the meter or remove the battery.
• Rugged probe for indoor and
outdoor measurements
• Easy to calibrate
• Rechargeable battery can be
used with optional hi 710040
inductive charger
|
| EC, TDS And Temperature Meters | | |
| HI 8730, HI 8731 and HI 8732 are complete, versatile and watertight conductivity meters that are lightweight and easy to maintain.
HI 8730 measures EC in the 0 to 1990 µS/cm range, TDS from 0 to 1990 ppm, and temperature from 0 to 70°C.
HI 8731 measures EC and TDS with extended ranges (from 0 to 6000 µS/cm and from 0 to 3000 ppm, respectively) and temperature from 0 to 70°C.
HI 8732 measures EC in the 0 to 4 mS/cm range, TDS from 0 to 1999 ppm and temperature from 0 to 70°C.
Each desired measurement mode features its own key for quick selection.
Conductivity measurements are automatically compensated for temperature changes with a fixed coefficient of 2%/°C.
Designed to require little maintenance, the HI 761285 probe features a built-in temperature sensor.
These meters can be calibrated at one point for EC or TDS, while the temperature range is factory calibrated.
• Automatic Temperature
Compensation
• Probe is easy to maintain and
features a built-in temperature
sensor
|
| TDS And EC Meters | | |
| These EC and TDS portable meters have been designed for simplicity of use and provide accurate measurements.
Readings are automatically temperature compensated for and the calibration is manually performed at one point.
The BEPS (Battery Error Prevention System) automatically switches the meter off when the battery level is too low to ensure reliable readings.
The housing has been completely sealed against humidity, for use in any type of environment.
The probe is easy to clean and requires little maintenance.
Choose the model with the measurement range that best fits your application:
HI 86301: TDS from 0 to 1999 ppm (mg/L)
HI 86302: TDS from 0.00 to 10.00 ppt (g/L)
HI 86303: EC from 0 to 1999 µS/cm
HI 86304: EC from 0.00 to 19.99 mS/cm
• Automatic Temperature
Compensation
• Probe is easy to maintain and
features a built-in temperature
sensor
|
| TDS Meter | | |
| Hi 8734 has not only been specifically designed for the water conditioning industry, but particularly in the softening, demineralization, reverse osmosis and drinking water applications.
Three ranges of measurement ensure the highest accuracy possible. All three ranges can be executed at the touch of a button, without having to change the conductivity probe. This makes it very easy to switch applications without having to worry about recalibration.
To add to the meter's accuracy and efficiency, manual temperature compen- sation is possible using a knob on the front panel.
For the best protection in the field, the 4- ring potentiometric probe is made of rugged pvc. To access difficult areas, the probe is supplied with a 1m (3. 3') cable. The ratio between conductivity and tds is factory set at 0. 5. |
| MS/TDS Meter | | |
| HI 8033 is a hand-held conductivity meter with the ability to take measurements in 3 different ranges.
The probe uses the 4-ring potentiometric method which measures conductivity with the utmost accuracy and reliability. The four stainless steel rings are embedded in the resin shaft of the probe create a smooth surface for fast and easy cleaning.
To improve accuracy, temperature compensation can be performed with a knob on the front panel of the meter.
The dial on the front of the HI 8033 easily indicates which range you are working in.
• 3 conductivity ranges and 1 TDS
• Accurate and reliable
• Easy to clean probe
|
| Waterproof With Amperometric Technology | | |
| HI 99300 and HI 99301 are two innovative meters that are provided with advanced features, designed for quick and easy field operation. The housing is waterproof and rated IP 67.
The multi-functional HI 76306 probe measures EC/TDS and temperature in one rugged unit. EC (or TDS) and temperature readings are displayed simultaneously. In addition, symbols and messages on the LCD indicate the meter status and guide the user through operations.
Calibration is a single point, automatic procedure and measurements are automatically compensated for temp- erature variations. The temperature compensation coefficient and the EC/TDS conversion factor are user-selectable.
At start-up, the meter shows the remaining battery percentage and when a low battery condition is detected, a battery symbol appears on the LCD to advise the user that only a few hours of working time are left. All settings and calibration data remain in memory when changing batteries. The meters are also provided with BEPS (Battery Error Prevention System), which turns the meter off when the battery level is too low, to ensure reliable readings.
• Easy to Operate
• Waterproof Casing
• Battery life shown on LCD
display
• Equipped with BEPS (Battery
Error Prevention System)
|
| pH/Conductivity/TDS Testers | | |
| HI 98129 and HI 98130 are waterproof testers that offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. These floating, waterproof testers have a large easy-to-read, dual-level LCD and automatic shut-off. pH and EC/TDS readings are automatically temperature compensated (ATC).
These technologically advanced testers have a replaceable pH electrode cartridge with an extendable cloth junction as well as, an EC/TDS graphite electrode that resists contamination by salts and other substances. This gives these meters an extended life. Your tester no longer needs to be thrown away when the pH sensor is exhausted.
The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (β).
Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester brings you all the features you've asked for and more! |
| Stick Conductivity Meter | | |
| The need for an easy, accurate and reliable method to measure conductivity and tds prompted hanna to develop conmet 1, conmet 2 and conmet 3. These meters utilize the proven 4-ring potentiometric method of measuring conductivity in liquids.
The 4-ring probe is constructed of a rugged resin shaft that houses 4 stainless steel rings, providing excellent immunity to hostile environments. The 4-ring technology provides a reading that is virtually unaffected by dirt and unclean samples. The smooth probe makes cleaning quick and simple.
All readings are temperature compensated. One-point calibration is performed by turning the trimmer on the instrument body. Conmet® 1 has a range of 0 to 1999 µs/cm, designed for areas such as: softeners, demineralizers and drinking water.
Conmet® 2 has a range of 0. 00 to 19. 99 ms/cm and is particularly suitable for: waste water, hydroponics and fertilizer control applications.
Conmet® 3 with a range of 0. 00 a 19. 99 ppt is perfect for hvac applications. |
| EC Tester | | |
| The HI 98331 soil test™ is a special pocket tester designed to directly measure soil conductivity and temperature. With a temperature sensor in the penetration probe, readings are automatically temperature compensated. Conductivity range can be calibrated at one point and is designed to be done in a standardized solution.
• 122 mm (4.5”) Penetration
probe
• Automatic temperature
compensation
• Lightweight and portable
|
| EC/TDS Tester | | |
| HI 983311 EC/TDS Aqua Dip™ provides simple and fast EC/TDS/Temperature measurements in places with high relative humidity. EC/TDS Aqua Dip™ allows immediate and precise response with only two operation buttons. This rugged unit is tough and built to last. The probe is even durable enough to be used as a stirrer. The HOLD button will freeze the display reading for your documentation requirements. Aqua Dip is factory calibrated and offers total protection against humidity, which makes Aqua Dip ideal for field use.
• Dual level LCD
• Probe can be used as a fertilizer solution stirrer
• HOLD button to freeze display
• Auto shut-off
• No calibration needed
|
| TDS Tester | | |
| To perform simple and fast TDS measurements in places with a high percentages of humidity, HANNA offers the Aqua Dip™ TDS. With only two operating buttons, the Aqua Dip™ TDS allows an immediate and precise response. This instrument indicates the TDS measurement in ppm and the temperature in °C. It is very simple to use, one button turns the meter on and the other switches from TDS to temperature measurements, and activates the HOLD function. The hold feature, in particular, is very important for measurements in tanks, where many parameters need to monitored and the values need to be recorded manually. Aqua Dip™ is factory calibrated. Measurements are automatically compensated up to 60°C with a reference temperature of 25°C. Aqua Dip™ uses conventional AAA batteries and is ideally suited for analysis in the field. |
| EC And TDS Testers | | |
| HI 981409 and HI 981410 TDS and EC meters have been specifically designed to address the needs of operators in hydroponics, greenhouses and nurseries. These meters employ the latest in custom- built, application-specific microchips as well as rugged housing to measure TDS and EC in fertilizer mixes.
Calibration is easy and completely automatic. Simply press and hold the on/off button for a few seconds and the microchip inside the meter requests the appropriate calibration solution. Place the probe in the solution and wait until it is calibrated. No extra buttons to push or dials to turn!
HI 1220 probe measures 25 cm (10") and can be used to mix the fertilizer solution! The custom-built microprocessor switches the meter off after five minutes of inactivity to save battery life. The outer casing also incorporates a molded eye so that the meter can be hung right where it is needed.
• Lightweight and they float!
• Water resistant
• Ideal for mixing fertilizer
• Automatic calibration
• Automatic temperature
compensation
|
| EC/TDS Testers | | |
| DiST® 7 & DiST® 8 handheld meters from HANNA are designed for quick and easy EC, TDS and temperature measurements with high accuracy. These waterproof instruments feature a dual-level LCD that simultaneously display EC or TDS and temperature in either °C or °F.
These microprocessor meters have been developed in direct response to users' requests in water treatment, boilers, cooling towers, reverse osmosis and agricultural applications.
Rugged and easy-to-use, each feature an on-board sample cell with built-in funnel, digital readout, push button automatic calibration and automatic temperature compensation. The EC/TDS conversion factor and temperature coefficient (β) are user-adjustable for application-specific measurements.
At startup DiST 7 & DiST 8 perform a self- check and then display the battery level to ensure proper working conditions. Each unit has a stability indicator and hold feature to prompt the user when to freeze the display and take a reading for easy and accurate recording.
Choose your model according to the
EC/TDS range of your application:
|
| EC And TDS Testers | | |
| DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS. This popular line of Dissolved Solids Testers have been redesigned to offer a host of improvements.
The casing has been modified to provide increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time.
HI 98300, HI 98301 (DiST 1) and HI 98302 (DiST 2) perform TDS measurements, while HI 98303 (DiST 3) and HI 98304 (DiST 4) provide conductivity readings. If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester. |
| Reaches Beyond The Average Tester | | |
| This series of primo testers has been designed for those hard-to-reach places where standard testers are not particularly suitable. The specially designed conductivity/tds probe supplied with the primo series, has a one meter (3') cable. This helps insertion in inaccessible or low level places without the operator having to maneuver into awkward positions to take a reading.
The automatic calibration together with the convenience of the hanna 20 ml sachet solutions make frequent calibration easier increases accuracy. Conductivity and tds readings are temperature sensitive and as a result, the probes contain a temperature sensor. All primo models automatically compensate for temperature variations.
Primo 1 measures tds from 0 to 1999
ppm in increments of 1 ppm.
Primo 3 measures both tds and
temperature from 0 to 60. 0°c.
Primo 4 measures ec reading from 0 to
10. 00 in increments of one hundredths of
ms/cm (ec).
• Probe with 1 m (3. 3’) cable
• Automatic calibration
• Automatic temperature
compensation
|
| Conductivity And TDS Testers | | |
| The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals. Professionals appreciate Primo's easy-to- read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe in, and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power micro- processor, which automatically turns it of after 5 minutes of inactivity.
• Choose from TDS or EC
• Automatic calibration
• Automatic Temperature
Compensation
|
| Accurate, Affordable Readings | | |
| DiST is an affordable pocket tester that ensures precise EC and TDS readings. Simply immerse the tester in the solution and the reading will be displayed. For many applications, it is crucial to determine the quantity of dissolved salts in a body of water. High concentrations can cause corrosion, deposits in heating systems and can be detrimental to aquatic plant life and animals.
HI 96301 (DiST 1) and HI 96302 (DiST 2) read in ppm, while HI 96303 (DiST 3)and HI 96304 (DiST 4) read in µS/cm.
Calibration is very simple to perform: immerse the tester in the calibration solution and adjust the trimmer on the rear of the meter until the correct value is displayed.
Automatic temperature compensation ensures correct readings. The digital display allows the operator to see the readings from every angle.
• Automatic Temperature
Compensation
• Rugged casing
|
| PH/ORP/EC Meter | | |
| Water Test provides quick and reliable measurement of the four most important variables in water analysis: pH, ORP, conductivity and temperature.
The lightweight and compact body makes it perfect for use in the plant as well as the field. Superior in design and construction, Water Test is made of rugged VALOX® material which provides excellent protection from typical environmental conditions.
Water Test is engineered with such simplicity that even non-technical personnel can use it: fill the base of Water Test with the sample to be measured, press "RANGE" to select the mode and then simply read your measurement! The rugged construction and simple operation make Water Test perfect for use in the fields of: water treatment analysis, waste water tests, ecological studies, aquaculture and hydroponic applications. |
| Water Hardness/Softness Tester | | |
| The pNa is an easy-to-use and inexpensive instrument for determining water hardness/softness. The hardness of water is due to the presence of magnesium and calcium. These make washing difficult, waste soap and create unpleasant scum and scale deposits. With a zeolite system, the calcium and magnesium ions are substituted on a one-to-one basis with sodium ions from a conditioning resin. Once all the sodium ions are exhausted, the resin has to be regenerated. This is currently determined by estimating the volume of water that goes through the softener and guessing when to change the resin!
Even though this may work in some cases, it fails in most since the sodium content of feed water is never constant. As a result, either the resin is regenerated too early and wastes resources, or too late, risking damage due to scaling. With the pNa, you can measure the sodium content of feed water and exit water in seconds. When the resin is exhausted of sodium, there will be no exchange and the pNa will read the same value at the two ends. Only then should the resin be changed. pNa takes guess work out of resin regeneration!
|
| Water Purity Testers | | |
| Pure water test (PWT) enables you to check the purity of your distilled or demineralized water in laboratory or industrial environments. Ultra Pure Water (UPW) is an ideal tester for MΩ checks. PWT is ideally suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. UPW is the first pure water tester to measure in 1/1000ths of micro-Siemens (µS) and provides on-the-spot and fast checks for minute traces of contamination in your water.
These testers are housed in a durable case that provides excellent protection against harsh industrial environments. The casing also features a larger LCD than previous models and with a more ergonomic shape is easier to handle.
• Exposed temperature probe for
fast response
• Graphite sensors for reduced
polarization
|
| EC/TDS Meters | | |
| These water-resistant conductivity/TDS meters are the result of customer requests for accurate, affordable process monitoring with low maintenance.
Five different models are available to cover all applications. Each meter is supplied with a direct 2-pin probe and 2 m (6.6') cable with a ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.
In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water-resistant enclosure. EC and TDS can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 Vdc power supply allows continuous monitoring over extended periods of time.
|
| EC / TDS / Temperature Monitors | | |
| These indicators from HANNA have large, dual-level, backlit LCDs and display instantaneous readings of both EC or TDS and temperature—even from a distance.
Waterproof and chemically resistant, HI 993301 and HI 993302 have been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. At startup, HI 993301 and HI 993302 perform a self- check to ensure proper working condition.
These powerful instruments feature a stability indicator that prompts the user when to take the reading. Readings can be frozen on the LCD display by pressing the HOLD button.
Calibration and temperature compensation are automatic, while the EC/TDS conversion factor and temperature coefficient factor (β) are user adjustable for application specific measurements. |
| EC And TDS Meters | | |
| These state-of-the-art meters have been engineered with a host of features suited for the aggressive environments commonly found in agricultural applications. Housings and cable connections have been sealed against vapor and humidity.
Select HI 983301N for TDS measurements with the common 0.7 TDS conversion factor (4-4-2) or HI 983301N/5 which uses a 0.5 conversion factor.
Both the TDS and EC meters come with a probe specifically made for horticulture and hydroponics applications. The probe compensates for temperature variations automatically, is easy to clean, is very stable and needs little maintenance.
With a 12 Vdc power supply included with the meter, low battery failures are never an issue. |
| PH/TDS/Temperature Monitor | | |
| Simply install the HI 981504 above the sample to be tested, plug the instrumen in and immerse the probes. pH, TDS and temperature measurements will be simultaneously displayed on three backli LCDs.
Users can easily select the temperature unit (°C or °F) through a switch on the back panel.
The HI 1286 gel-filled pH electrode is provided with a waterproof sheath to protect the BNC connector. The unique design of the electrode provides longe life in aggressive solutions. The HI 7634 TDS probe is easy to clean and requires little maintenance. Measurements are accurate and the meter can be calibrated at one or two points for pH and at a single point for TDS. Temperature range is factory calibrated.
Two models are available:
HI 981504/5 with 0.5 TDS factor
HI 981504/7 with 0.7 TDS factor
• Simultaneous display of pH, TDS
and Temperature
3 backlit LCDs
•
Continuous measurements
•
Measure in °C or °F
•
Extra-large displays
•
12 VDC power supply
•
|
| Conductivity Calibration Solutions | | |
| The correct calibration of the instrument/sensor measuring system will ensure your results are accurate and reproducible.
The use of standard calibration solutions is fundamental for correctly calibrating the measuring system.
The HANNA wide range of conductivity calibration solutions has been produced to ensure the maximum accuracy for conductivity meters and probes.
Guaranteed Quality
Your conductivity meter can be calibrated in a few minutes right in your laboratory or in the field. HANNA offers a wide range of conductivity solutions in different forms and values.
Each label shows the production batch number, expiration date and conductivity/temperature correlation table.
Certified Solutions For those users that require documented accuracy, conductivity (EC) solutions are available in bottles or sachets with certificates of analysis. |
| 84 Scm Cal Solution | | |
| This 84 µS/cm conductivity solution makes it possible to calibrate instruments with a conductivity scale of up to 200 µS/cm, for example, in the measurement of pure or distilled water.
By using our single-dose 20 mL sachets, the freshness of the solution is guaranteed for every calibration.
The 1413 µS/cm solution is the one best suited for general use. This solution is also available in combined kits with the pH 7 buffer for easy calibration of multiparameter instruments.
It is also available in different sized bottles and in single-dose, ready-to-use sachets. The HI 8031L solution is provided in an opaque bottle according to FDA (Food & Drug Administration) regulations, which prevents the reagent from damage due to extended exposure to light.
Our wide range of calibration solutions also includes solutions provided with a certificate of analysis, to satisfy the requirements of any application from the farm to the factory.
|
| 5000 cm Cal Solution | | |
| This solution is ideal for those applications that need to achieve higher reading accuracies in a conductivity scale between 2000 µS/cm and 10000 µS/cm. HANNA has created a 5000 µS/cm calibration solution in a wide range of sizes and packages to suit every application.
This solution is widely used in agriculture for monitoring and preparing nutrient solutions for proper crop production.
|
| 111800 CM Cal Solution | | |
| This calibration solution is useful to calibrate instrumentation used to measure samples with conductivity higher than 100 mS/cm (100,000 µS/cm). In fact, this solution makes it possible to calibrate instruments that perform under conditions of high salt concentrations.
This calibration solution is ideal for use in systems where phase limits have to be detected (e.g. separation of a substance from water), monitoring of bottle washing plants, beverage controls, check of acids or bases in electrodeposition processes and some plating baths. |
| TDS Calibration Solutions | | |
| HANNA is one of the few producers to offer calibration solutions for lab and field applications with packages from 20 to 500 mL. Our packaging has been designed to keep air and light from damaging the solution.
Material Safety Data Sheets
The material safety data sheets for all the HANNA solutions in this catalog are available on-line or upon request.
Expiration Date
The production batch number and the expiration date are reported on all of HANNA calibration solutions.
NIST Traceability
TDS solutions are produced with high-quality potassium chloride in various concentrations. They are standardized using a conductivity meter calibrated with NIST potassium chloride. |
| Powerful Customization, Accurate Analysis | | |
| HI 901 and HI 902 are automatic titrators from HANNA that compliment our wide range of products dedicated to quick and accurate laboratory analysis. HI 902 also features the addition of back-titration capabilities.
Each unit is provided with a host of numerous features suitable for routine sample analysis. HI 901 and HI 902 perform acid/base, potentiometric and amperometric titrations.
With our exclusive Clip Lock system for burette replacement, changing from one titrant to another is done in a flash! Often, preliminary titration operations are very long and arduous. A burette often needs to be adjusted for correct dosing, which extends waiting time for new sample analysis. HANNA has engineered a way to solve this problem.
The innovative Clip Lock system allows users to change burettes in two simple steps, passing from one titrant to the next |
| Quick Change | | |
| Keep several burretes on hand for a quick change.
|
| Automatic Titration Systems | | |
| With conventional titrators, there is the risk of cross contamination of titrants when exchanging reagents. Reconfiguring the titrator for different sample methods consumes time and reagents. Each method may need different reagents and care must be used when purging and cleaning the burette. To avoid these problems, hanna introduces the clip- lock™ exchangeable burette system to prevent cross contamination while reducing loss of time and reagents. Burettes simply slide out for quick exchanges and detaching the aspiration and dispensing tubes from the titrant bottles is easy.
Having several prepared burettes on hand will make the hanna 900 series the fastest and most versatile titration systems available. Interrupting an important cycle of analysis due to a malfunctioning burette is a thing of the past. With the hanna clip-lock™ system you can simply substitute the burette and complete all your tests with the same titrant! Hanna’s burettes feature a threaded screw connection to prevent leakage problems. Burettes are available in 5 ml, 10 ml & 25 ml sizes and are made of chemically resistant material to ensure many years of trouble-free operation. |
| Total Titratable Acidity Titrator | | |
| The HI 84430 is an automatic titrator designed for easy, fast and accurate analysis of Total Titratable Acidity in water.Potentiometric endpoint determination, peristaltic titrant delivery and integrated magnetic stirring systems eliminate the error and technique dependent results associated with manual titrations.
The accuracy of the instrument is ensured by performing a peristaltic pump calibration using the provided HANNA standard. The HI 84430 endpoint determination algorithm analyzes the pH vs. volume curve to determine the exact pH endpoint and performs the necessary calculations. The results are displayed in mg/L CaCO3 or meq/L CaCO3 units on the graphic display.
An intuitive interface makes the instrument simple to use. A dedicated HELP key guides the user through set-up and calibration sequences, reports instrument status and aids in troubleshooting.
HI 84430 features include: log on demand for up to 100 samples (50 pH measurements, 50 titration results), GLP compliance and PC interface via USB. |
| HI 84431 Total Titratable Alkalinity Titrator | | |
| The HI 84431 is an automatic titrator designed for easy, fast and accurate analysis of Total Titratable Alkalinity in water. Potentiometric endpoint determination, peristaltic titrant delivery and integrated magnetic stirring systems eliminate the error and technique dependent results associated with manual titrations.
The accuracy of the instrument is ensured by performing a peristaltic pump calibration using the provided HANNA standard. The HI 84431 endpoint determination algorithm analyzes the pH vs. volume curve to determine the exact pH endpoint and performs the necessary calculations. The results are displayed in mg/L CaCO3 or meq/L CaCO3 units on the graphic display.
An intuitive interface makes the instrument simple to use. A dedicated HELP key guides the user through set-up and calibration sequences, reports instrument status and aids in troubleshooting.
HI 84431 features include: log on demand for up to 100 samples (50 pH measurements, 50 titration results), GLP compliance and PC interface via USB. |
| Free And Total Sulfur Dioxide | | |
| An important reason for adding SO2 is to avoid oxidation. When there is oxygen around, SO2 itself becomes oxidized before phenol compounds in the wine, and so acts as an oxygen scavenger. Also, SO2 suppresses the activity of enzymes that cause browning and other problems.
What is really protecting your wine is molecular SO2. When you add SO2, depending of circumstances, some of it immediately becomes bound. The relationship between the amount of SO2 and amount of SO2 remaining free is complex. It is clear, however, that is largely governed by the total SO2 content of the wine. The rate of binding decreases as the free SO2 concentration increases. The exact relationship between free and bound (total-free) SO2 will vary from wine to wine. Below 30-60 ppm, 33% to 50% of SO2 addition becomes bounded. What remains is called “free” and it is divided in two parts. The larger, and relatively ineffective free part is “bisulphite” (HSO³). The smaller part of the free is the active molecular. The amount of molecular SO2 in your wine
depends both on the level of free SO2 present as well as pH. For instance, at pH 3.2, the amount of the free SO2 for 0.8 ppm molecular SO2 is 22 ppm. At pH 3.5, you will need 43 ppm free - essentially double.
In most situations, 0.8 pp, molecular SO2 during bulk storage and at bottling will provide you with adequate protection from oxidation and bacterial action. This includes prevention of malolactic bacteria as well. It is important to remember that the amount of free SO2 in the wine depends on three things: how much is added, how much was present before the addition and how much of your addition promptly becomes bound.
The level at which molecular SO2 can be detected by the human senses is about 2.0 ppm. This is also the level which is needed for maximum protection of your wine. This is particularly true in the case of sweet, and most notably, botrytised wines.
The HANNA HI 84100 offers the possibility to test free or total SO2 in all the wines including the red ones, that are difficult to test with manual methods because the color changes are hardly seen. |
| Titratable Total Acidity Mini Titrator | | |
| Acids occur naturally during the growing of grapes as as part of the fermentation process wines show lower levels of acid when there are hot growing seasons or when the grapes come from hotter regions. In the proper proportion, acids are a desirable trait and give the wine character. The three predominant acids in wine are tartaric, malic, and citric, all of which are intrinsic to the grape. Tartaric acid is the principal acid in grapes and is a component that promotes a crisp flavor and graceful again in wine.
A moderate amount of a wine’s acid comes from malic acid, which contributes to fruitiness, and a small amount comes from citric acid. Wine also contains trace amounts of other acids. The least desirable acid in wine is acetic acid, which, when preset in more than a nominal amount, give swine a sour vinegary aspect.
Total acidity, also called, titratable acidity, is the sum of the fixed and volatile acids. in the United States the total acidity is usually expressed in terms of tartaric acid, even though the other acids are measured. Total acidity directly effects the color and flavor of wine and, depending on the style of the wine, is sought in a perfect balance with the sweet and bitter sensations of other components. Too much acidity makes wine tart and sharp; too little makes wines flat, flabby and uninteresting. Proper acidity in wine is what makes it refreshing and an ideal accompaniment to food.
The proper acid level of a wine varies, with sweeter wines generally requiring somewhat higher levels to retain the proper balance. For dry table wine the acceptable range is usually 0.60 to 0.75%; for sweet wine it’s 0.70 to 0.85%. |
| Dissolved Oxygen Meters | | |
| Research grade graphic color lcd meter
Hanna’s research grade bench meter line expands to include hi 4421. Hi 4421 features do, bod, our and sour measurement modes in a compact versatile instrument. These meters also feature a calibratable barometric pressure transducer. The color 240 x 320 dot matrix lcd is capable of displaying graphs, soft key menus, help screens and calibration reminders. Hi 4421 also incorporates an intuitive menu system to help streamline your workflow process and provide accurate measurements quickly and efficiently. Measurements can be uploaded to a pc via usb or rs 232 with hanna’s optional software. |
| Designed For Aquaculture | | |
| HI 9147-04 DO Meter is specially designed for aquaculture applications. This unit is supplied with a galvanic probe.
This unit also equipped with a rechargeable battery (inductive charger optional) and protective rubber boot. |
| Cutting Edge Technology | | |
| To bring users high performance and reliability, hanna uses the latest in electronic and sensor technology in its line of dissolved oxygen meters. Being one of the few manufacturers of d. O. Meters worldwide, hanna has taken on the task of providing the industry with a diverse range of products that meet most application requirements.
The polarographic probe supplied with each meter is constructed with rugged pei and an easy-to-change membrane cap. The cable length varies from 2 to 20 meters (6. 6' to 67'). Each probe also incorporates a built-in temperature sensor for rapid response to variations in temperature.
Our new hi 4421 graphic display, color lcd bench meter features do, bod, our and sour measurement modes in a compact versatile instrument. The 240 x 320 dot matrix color lcd is capable of displaying graphs, soft key menus, help screens and calibration reminders.
The new hi 98186 dissolved oxygen meter completes our hi 9818x family and includes barometric pressure measurement and calibration with a user selectable unit (mmhg, inhg, atm, mbar, psi, kpa) and salinity, pressure and temperature compensation. Hanna constantly listens to customer feedback and designs products around you. The new oxy-check™ hi 9147-04 do meter (with a 4 m cable) and hi 9147-10 do meter (with a 10 m cable) is specially designed for aquaculture applications. This unit is unique amoung our family of do meters in that it comes with a galvanic probe. Unlike polarographic probes, galvanic do probes require no conditioning time. An optional recharging cradle is available.
Hi 9143, hi 9145 and hi 9146 use microprocessors for quick, reliable calibration. These meters compensate for the effects of salinity and altitude to ensure the highest level of accuracy. A waterproof housing provides protection from humid and dusty conditions.
|
| Dissolved Oxygen Meters | | |
| These models measure D.O. from 0.00 to 45.00 mg/L and from 0.0 to 300.0% of O2, so that even oxygenated water in fish farms and labs can be monitored with these portable meters.
HI 9141 was the world's first portable printing D.O. meter. HANNA recognized the need to give water treatment and fish farming industries the proper means to easily monitor and record D.O. levels.
HI 91410 is the world's first portable logging D.O. meter. Up to 8000 readings can be stored into the meter's memory for retrieval at a later date or for transfer to a PC through HANNA‘s HI 9200 infrared transmitter.
HI 2400 logging D.O. bench meter measures, records and transmits data to a computer. The display gives step-by-step prompts for the D.O. and temperature calibration procedures. Salinity and altitude are automatically compensated and data can be logged at user selectable intervals. This meter also has an extended D.O. range for any application.
|
| Dissolved Oxygen And BOD Meter | | |
| HANNA’s research grade bench meter line expands to include HI 4421. HI 4421 features DO, BOD, OUR and SOUR measurement modes in a compact versatile instrument. The color 240 x 320 dot matrix LCD is capable of displaying graphs, soft key menus, help screens and calibration reminders. HI 4421 also incorporates an intuitive menu system to help streamline your workflow process and provide accurate measurements quickly and efficiently. Measurements can be uploaded to a PC via USB or RS 232 with HANNA’s optional software.
- Extended range up to 90 ppm and 600% saturation True barometric atmospheric
- pressure compensation Automatic or user calibration
- Auto-hold to freeze LCD readings
- AutoEnd mode for DO
- Flexible logging with 3 modes
- BOD (biochemical oxygen demand),
- OUR (oxygen uptake rate) and SOUR (specific oxygen uptake rate) GLP
- Two selectable alarm limits
- Up to 100 logging lots, 200 OUR
- and SOUR reports and up to 200 BOD method entries
|
| DO Meter | | |
| For dissolved oxygen measurements, HANNA offers the HI 2400—an essential instrument for testing pharmaceutical and food products as well as for monitoring in water treatment plants.
The user can choose to display DO readings in mg/L O2 or % of saturation. This meter can be used in any laboratory and for any type of water, as it allows measurement compensation both for altitude and salinity factors.
HI 2400 features an automatic calibration procedures at 1 or 2 points (at 0 and 100% O2 saturation).
The automatic logging interval can be set to perform analysis and store data in non- volatile memory.
All logged data can be downloaded to your PC through an RS232 serial port. Memory can store up to 8000 samples.
This meter is suplied with a polarographic sensor which measures the current generated by the reaction of O2 with Ag, for enhanced stability.
• Automatic calibration
• Altitude, salinity and temperature compensation
• Data logging and storage
• PC compatible
• Polarographic DO probe included
|
| Industrial Grade Portable With Extended Range | | |
| HI 98186 dissolved oxygen meter includes barometric pressure measurement and calibration with a user selectable unit (mmHg, inHg, atm, mbar, psi, kPa) along with salinity, pressure and temperature compensation.
• Extended range up to 50 ppm and 600% saturation
• Built-in barometer
• Salinity, pressure and temperature compensation
|
| Printing And Logging Dissolved Oxygen Meters | | |
| HI 9141 and HI 91410 are portable, printing D.O. meters designed for continuous monitoring and recording at selectable time intervals. The low-impact printer uses regular paper that is easily sourced and will not fade over time.
HI 91410 combined all of the comprehensive printing functions of the HI 9141, with the capability to log measurements. In addition to supplying the user with instant print-outs of D.O., HI 91410 also provides data logging storage of up to 8000 readings. Scroll through the data at any time, print or even transfer to a computer system via (optional) HI 9200 infrared cradle.
Simply place the meter on the cradle and, at the touch of a button, transfer all of the recorded lots in seconds. This infrared connection is important in humid environments, where a standard RS232 plug on a meter could become damaged.
In addition to the automatic calibration feature, both meters automatically compensate for two very important parameters: altitude from 0 to 1900 meters (6230'), and salinity from 0 to 40 g/L.
• Store up to 8000 readings
• Computer compatible with optional infrared cradle and software
• Manually adjustable altitude and salinity compensation |
| Extended Range Dissolved Oxygen Meters | | |
| Field work can subject instrumentation to the inclemency of weather. Cold, rain, snow, dust and humidity can cause condensation to enter the housing, which eventually compromises the meter and rapidly deminishes its performance and life. HI 9143 and HI 9145 are designed for harsh outdoor applications—especially wastewater treatment and fish farming.
Simple on-site calibration requires no chemical solutions. Just expose the probe to air and press the CAL button. In a few minutes, the meter is calibrated and ready to use. Auto-calibration eliminates the need to use a screwdriver or other devices to adjust the reading.
The new and improved HI 9143 and HI 9145 measure and display O² from 0 to 300%, 0 to 45 mg/L and °C from 0 to 50°C.
In addition to the features of HI 9145, HI 9143 also supplies the user with manual compensations for salinity and altitude factors. Both meters automatically compensate for the effects of temperature.
• Altitude, salinity and temperature compensation
• Designed for the field
• Polarographic probe and rugged carrying case included
|
| Dissolved Oxygen Meter | | |
| HI 9146 is a water-resistant, microprocessor- based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC).
D.O. measurements can be displayed in parts per million (ppm=mg/L) or in % saturation. The temperature range is indicated in Celsius from 0 to 50°C with 0.1 resolution. The HI 9146 also allows manual compensation of altitude and salinity values.
The polarographic probe, supplied with the instrument is provided with a protective cover for the membrane. A HOLD button allows the user to freeze the reading on the LCD.
HI 9146 can be powered with batteries (with low battery indicator) or through a 12 Vdc adapter.
• Extended altitude compensation
• Extended salinity compensation
• Designed for the field
|
| HI 9142 Manual Calibration Dissolved Oxygen Meter | | |
| The ever increasing demand for instant on-site analysis results has created a need for innovative and rugged portable, waterproof meters.
Field work can subject instrumentation to the inclemency of weather. Cold, rain, snow, dust and humidity can cause condensation to breech the housing. Once the housing has been compromised, the meter is susceptible to diminishing performance and life. The rugged, waterproof housing of the HI 9142 solves many of the problems of field use. It is very simple to use: calibration is performed with HI 7040 zero oxygen solution, while 100% calibration is done in air.
The polarographic probe (HI 76407/4) is accurate to 0.3 ppm and is supplied with a 4m (13') cable that allows measurements to be taken even in hard to reach places.
For applications that require longer probe cables, the HI 76407/10 with a 10m (33') cable and HI 76407/20 with a 20m (67') cable are available.
• Automatic temperature compensation
• Designed for harsh conditions
• Affordable and efficient
• DO probe and rugged carrying case included
|
| Dissolved Oxygen Meter | | |
| HI 8043 is a versatile D.O. meter ideal for use in school laboratories. A common 9 Volt battery supplies the unit with up to 100 hours of continuous power, making it truly portable.
There is also a low battery warning that helps eliminate the possibility of taking an erroneous reading due to low power. The simplicity of this meter is its greatest asset. Select the O2 mode and the polarigraphic probe will supply you with accurate dissolved oxygen measurements in mg/L. Switch the dial to °C to display the temperature readings.
The Standby (STB) mode is particularly useful to keep the current flowing through the probe which is continuously polarized and ready for use. |
| Dissolved Oxygen Meter Simplified DO Measurement | | |
| The hanna hi 93732n utilizes a sophisticated custom microprocessor and a modified winkler method to measure dissolved oxygen accurately and quickly.
Measurements are made in a few short steps that can be performed by technical and non-technical operators alike.
In fact, all you need to do is insert a cuvet containing your sample into the meter and press zero. This will calibrate the meter to your sample in seconds.
Then add a few drops of the reagent to the sample to generate a color whose intensity depends on the d. O. Content.
Place the reacted sample back in the meter and the instrument will do the rest of the work for you! Hi 93732n will display the d. O.
Concentration in tenths of a ppm in clear digits on the large lcd. There is no need to worry about temperature changes, membrane status or salinity variations.
|
| Dissolved Oxygen Meter With Galvanic Probe For Fish Farming | | |
| HI 9147-04 DO Meter (with a 4 m cable) and HI 9147-10 DO Meter (with a 10 m cable) are specially designed for aquaculture applications. This unit is unique amoung our family of DO meters in that it comes with a galvanic probe.
Unlike polarographic probes, galvanic DO probes require no conditioning time. When you need to measure multiple samples in a given period of time, pick it up and measure immmediately and on demand.
HI 9147 is equipped with automatic temperature compensation plus user adjustable altitude and salinity compensations for the most accurate measurements. This unit comes with a rechargeable battery (inductive charger not included).
HI 9147 is a must have for DO sensitive organisms or high bio-load environments.
• Designed specifically for aquaculture
• Backlit LCD
• Automatic temperature compensation
• Automatic salinity compensation
• Water-resistant
• Protective rubber boot included
|
| Dissolved Oxygen Meter With Galvanic Probe For Fish Farming | | |
| Arguably the most important parameter of water quality. Most species require a minimum of 3 ppm DO, but 8-10 ppm is preferable unlike other gases such as nitrogen, oxygen supersaturation doesn’t usually result in gas bubble disease (“pop-eye”), so high level generally aren’t an issue. |
| DO Probes And Accessories | | |
| With several cable lengths to choose from
Hi 76407 and hi 76401 dissolved oxygen probes are extremely rugged making them perfect for laboratory as well as field applications. Calibration is fast, simple and all do measurements are temperature compensated. The pre-tensioned, ready-made ptfe membrane can be changed in a few seconds without the need to stretch and cut the replacement.
The hi 76407 is offered with several cable lengths to meet your specific needs. |
| Thinner, Lighter DO Probe For Laboratories | | |
| Light and thin do probe with 1 m (3. 3') cable
Hanna dissolved oxygen probes are extremely rugged and perfect for laboratory and field applications. Calibration is fast and simpl and measurements are temperature compensated. The sensitive ptfe membrane can be changed in a few seconds.
|
| Printing And Logging Thermo-hygrometers | | |
| HI 9161 and HI 91610 are advanced portable, printing, thermo-hygrometers. These unique, rugged meters give instant printouts of sample #, date and time of readings, printing interval, relative humidity and temperature at user- selectable intervals. R.H. and temperature measurements have a 0.1 resolution.
HI 91610 combines the high accuracy and portability of HI 9161 with extensive printing and logging features and an infrared RS232 data transfer system.
In addition to supplying the user with R.H. and temperature at the touch of a button, the HI 91610 data logging capabilities store information for transfer to a PC or for retrieval and/or printing at a later date. Sophisticated software allows up to 8,000 readings to maximize available space, regardless of logging interval. The HI 9200 infrared transmitter is available as an optional accessory. HI 70604/5, RH probe with a 5m (16.5') cable is also available for special applications.
Both models are available in two versions,
for °C or °F readings.
• HI 9200 optional infrared PC transmitter available
• Store up to 8,000 readings
• Rugged housing
|
| Rugged Hygrometer | | |
| HI 9064 and HI 9065 are heavy-duty hygrometers specifically designed for field applications such as greenhouse management and HVAC systems.
They are housed in a rugged water- resistant case to provide maximum protection in the field. The relative humidity probe contains a thin-film polymer sensor, which quickly performs all RH readings to 98% accuracy. The "HOLD" button will instantly freeze the reading on the LCD.
HI 9065 can also measure temperature with an internal sensor in the RH probe from 0 to 60°C as well as 32 to 140°F scales. You can also connect a separate temperature probe for gas and liquid measurements (HI 765 series).
• Standard 2 m (6.6’) cable allows monitoring in hard to reach areas
• “HOLD” key to freeze readings on the display
• Rugged housing
• Built-in temperature sensor
|
| Data-logging Thermo-Hygrometers | | |
| HI 9564 and HI 9565 are two new portable thermo-hygrometers designed to provide excellent performance in harsh environments and poorly lit areas.
In addition to RH and temperature, HI 9565 will display the dew point with the press of a button. The dew point indicates the presence of water vapor in the air at a given temperature. With this feature HI 9565 permits useful and rapid environmental monitoring where a controlled microclimate is necessary, like greenhouses, museums, clean rooms and laboratories.
HI 7062 RH probe features a built-in microchip that can store calibration data. When the probe is connected to another hygrometer, the microchip transfers the stored calibration data and eliminates the need to recalibrate the instrument.
Both instruments feature auto-off after 20 minutes of inactivity, temperature readings in Celsius and Fahrenheit, and on-line help to indicate anomalies and direct procedures.
• “HOLD” key to freeze readings on the display
• Backlit LCD
• Auto shut-off
• Built-in temperature sensor
|
| Compact Thermo-Hygrometer | | |
| HI 93640 is a compact, portable and versatile hygrometer that monitors relative humidity, anywhere. This simple- to-use meter is ideal for the HVAC field The built-in thin-film capacitance sensor assures accurate humidity measurements from 5 to 95% RH with a resolution of 0.1%.
The rubber keypad protects the keyboard from dust and accidental splashes. A sintered cap can be placed on the sensor shaft for protection in dusty environments. If faster response is desired, the cap can be removed.
Designed to be operated with just one hand, the compact housing fits easily in your palm.
For better instrument protection, use HANNA’s optional shockproof rubber boot (shown).
• Portability and simplicity
• Low battery indicator
• Dual temperature range
|
| Relative Humidity And Temperature | | |
| This solid-state transmitter plugs into its wall-mounted receptacle for on-site, continuous monitoring of relative humidity and temperature in critical or controlled environments.
The HI 8666 has an excellent accuracy of ±2% RH and ±1% °C. Each 4-20 mA analog signal can be sent to remote panel meters, controllers or data acquisition systems. The signals are to be powered by separate external voltage sources.
Equipped with a removable sintered cap, the HI 8666 sensor is well protected for the long run against the ingress of dust or unclean environments.
With the sintered cap installed, the life of the sensor and the instrument is prolonged and less maintenance is required. This is ideal in some applications, such as food and industry where reliability rather than response time is the primary objective.
With the sintered cap removed, the sensor’s response time is faster but it is no longer protected from dust or debris.
• Removable sintered metal cap
• Dual-range transmitter
• Can be quickly removed for maintenance with minimal downtime
|
| Relative Humidity Probe | | |
| Hanna humidity probes utilize a high-tech thin-film polymer capacitance (tfpc) humidity sensor. This sensor enables rapid response and high accuracy. Several different versions are available for your specific needs.
For rapid response, hanna recommends a probe with a perforated cap. For industrial environments with dust and powders, hanna recommends a probe with a sintered cap. |
| CE Mark Definition And Compliance | | |
| All industries make use of electronic instrumentation for their daily operations. The increased use of electronic equipment in many industries means that more instruments are used together and in conjunction with each other, often in a very restricted area. Proximity of equipment has increased the likelihood of interferences between various instruments, as well as the instruments and the environment surrounding them. Improper operation of the equipment may result from these undesired Electro-Magnetic Interferences (EMI). |
| Electro-Magnetic Interferences (EMI) | | |
| Electro-magnetic interferences are generated by currents which flow into the electronic circuitry of instrumentation. Some Electro-magnetic interferences originate in nature through atomospheric phenomena, such as lightning and static electricity. Electro-Magnetic Compatibility (EMC) Directives define two categories (illustrated on the right): Each category is further sub-divided into:
• Conducted EMI propagated by wires (such as power or connection cables)
• Radiated EMI spread through the air
The effects of these Electro-magnetic interferences are the main cause for:
• Incorrect equipment operation and therefore, inaccurate measurements
• Damage to the equipment, itself
International Governing bodies have defined the EMI tolerance limits for electronic instruments. The aim is to limit EMI effects and to reach an Electro-Magnetic Compatibility (EMC) that permits all electronic devices to operate normally, and in proximity with each other, without having an adverse effect on their operation. |
| IP 67 Heavy-Duty Construction | | |
| HANNA waterproof meters comply with the IP 67 standards that classify them dust-tight and protected against the effect of temporary immersion in water. This enables the units to operate in the harshest of environments, protected against spills, dust, high humidity and severe weather conditions. This makes them ideal for outdoor measurements and the most severe industrial applications such as mines, food processing, plating, industry, foundries, etc. HANNA waterproof meters are built to last.
This standard describes a system for classifying the degree of protection provided by the enclosure of electrical/electronic equipment. Developed by the European Committee for Electro- Technical Standardization (CENELEC), these standards are designed to numerically rate an electrical product on the level of protection its enclosure provides. By assigning different number codes, the degree of protection of the product can be quickly and easily identified. In the IP 67 code, for example, IP signifies International Protection, the first digit 6 indicates the level of protection from solid objects, and the second digit 7 denotes the level of protection from liquids. See the tables below for the details. |
| Bar, Stir Bars For Magnetic Stirring | | |
| Micro stir bars specifically designed for HANNA stirrers. The PTFE coating ensures high chemical resistance even with aggressive substances. |
| Base For Checktemp | | |
| Handy plastic stand for Checktemp
HI 740024 Stand for Checktemp®1
HI 740024P Stand for Checktemp®1 (10 pcs)
HI 740025 Stand for Checktemp®1 (6 pcs)
|
| Base For HI 76405 | | |
| Battery, 1.5 V
Replacement batteries used in most HANNA testers.
HI 740026P 1.5 V battery (12 pcs)
HI 721301 1.5 V battery (100 pcs)
|
| 1.5 V AA Battery | | |
| Replacement batteries for all hanns waterproof and printing/logging portable meters.
HI 740027P 1.5 V AA battery (10 pcs)
|
| 3.6 V AA Lithium Battery | | |
| - Replacement battery for HI 141 series.
- HI 740033 3.6 V AA lithium battery
|
| Battery, For Amphel Electrodes | | |
| Spare battery for amplified ph and orp industrial electrodes, amphel series.
hi 740031 spare battery for amphel electrodes
|
| Battery, Inductive Chargers | | |
| These models have up to 200 hour extended battery life to guarantee long operation in the field. When the batteries are low, you don’t have to worry about carrying a spare set with you—the batteries can be recharged with HANNA’s inductive recharger. Simply leave the meter on the recharger for a few hours and you’re ready to go. The recharger can either be plugged to a standard 115V socket using the included HANNA adapter or into a 12 VDC source such as a car's 12 volt accessory outlet.
HI 710040 Inductive battery recharger with no external contact
HI 710041 Inductive battery recharger for HI 9818x and HI 9817x series.
HI 710044 Inductive battery recharger for HI 9124, HI 9125 and HI 9126
|
| Beaker | | |
| Rugged plastic beakers available in several different sizes. For use during testing with HANNA chemical test kits and photometers. Anti-spill ported caps are available separately.
HI 740036P 100 mL plastic beaker (10 pcs.)
HI 740037P 20 mL plastic beaker (10 pcs.)
HI 740223 170 mL plastic beaker
HI 740224 170 mL plastic beaker (6 pcs.)
HI 740032P Cap for 20 mL plastic beaker (10 pcs.)
HI 740034P Cap for 100 mL plastic beaker (10 pcs.)
|
| Blades, For Meat PH Electrodes | | |
| These stainless steel blades, in conjunction with FC 230, FC 231 and FC 232 pH electrodes, allow easy meat penetration. Two models are available for different depths.
FC 098 Stainless steel blade for meat pH electrode, 20 mm (0.8’’)
FC 099 Stainless steel blade for meat pH electrode, 35 mm (1.4’’)
|
| Boot, Shockproof | | |
| These special boots have been designed to protect your instruments and prevent damage due to accidental impact, particularly in field applications. They can withstand high temperature (up to 200°C / 392°F), ozone and environmental phenomena, and are available in 2 colors. |
| Boot, Shockproof Rubber Boot For Portable Meters | | |
| HI 710009 shockproof rubber boot, blue
HI 710010 shockproof rubber boot, orange
|
| Bottle for D.O. Analysis | | |
| Glass bottle, supplied with the hanna chemical test kits and photometer for D.O. analysis. The bottle is provided with a glass stopper to ensure an air tight seal. Bottle and stopper can be also ordered separately.
HI 740039 60 mL glass bottle for D.O. analysis
HI 740041 60 mL glass bottle and stopper (6 pcs)
HI 740042 60 mL glass bottle for D.O. analysis (6 pcs)
HI 740043 Glass stopper for 60 mL glass bottle (6 pcs)
|
| Bottle, Polyethylene | | |
| High density polyethylene bottles, suitable for sampling, mixing and storage. Available in packs of 6 and 10 pcs, and in several capacities, from 30 mL to 1 Gallon (approx. 3.78 L). Polypropylene caps can be ordered separately.
- HI 740056P 30 mL bottle (10 pcs)
- HI 740058 30 mL bottle (6 pcs)
- HI 740059P Cap for 30 mL bottle (10 pcs)
- HI 740048P 120 mL bottle (10 pcs)
- HI 740050 120 mL bottle (6 pcs)
- HI 740049P Cap for 120 mL bottle (10 pcs)
- HI 740052P 230 mL bottle (10 pcs)
- HI 740054 230 mL bottle (6 pcs)
- HI 740055 Cap for 230 mL bottle (6 pcs)
- HI 740070P 500 mL bottle (10 pcs)
- HI 740072 500 mL bottle (6 pcs)
- HI 740073P Cap for 500 mL bottle (10 pcs)
- HI 740046P 1 L bottle (10 pcs)
- HI 740047P Cap for 1 liter bottle (10 pcs)
- HI 740044P 1 Gallon bottle (5 pcs)
- HI 740045P Cap for 1 Gallon bottle (10 pcs)
|
| Bottle, Polyethylene, Dropper | | |
| Provided with hanna test kits where one-by-one drop dosing is required. Thanks to the removable plug, bottle refilling is very easy.
HI 740060P 30 mL dropping bottle (10 pcs)
HI 740063 30 mL dropping bottle (6 pcs)
HI 740061P Plug for 30 mL dropping bottle (10 pcs)
HI 740064 Plug for 30 mL dropping bottle (6 pcs)
HI 740065P Cap for 30 mL dropping bottle (10 pcs)
|
| Bottle, Polyethylene, FDA Compliant | | |
| These black bottles protect liquids even under direct light. They are available in several capacities, from 30 mL to 1 liter.
- HI 740068P 30 mL FDA bottle (10 pcs)
- HI 740069P Cap for 30 mL FDA bottle (10 pcs)
- HI 740084P 500 mL FDA bottle (10 pcs)
- HI 740086 500 mL FDA bottle (6 pcs)
- HI 740087P Cap for 500 mL FDA bottle (10 pcs)
- HI 740082P 1 L FDA bottle (10 pcs)
- HI 740083P Cap for 1 L FDA bottle (10 pcs)
|
| Bracket For Installation Of Process Meters | | |
| To be used for installation of panel mounted process meters, such as BL 931700, HI 8710 and pH 500.
HI 740145 Mounting bracket for HI 8710 housing (2 pcs)
HI 740146 Mounting bracket for BL 931700 housing (2 pcs)
HI 740147 Mounting bracket for pH 500 housing (2 pcs)
|
| Cable, 6-wire | | |
| 6-wire cable for 4-ring conductivity probes. Several lengths are available.
HI 779/1 6-wire cable, 1 m (3.3’)
HI 779/3 6-wire cable, 3 m (9.9’)
HI 779/5 6-wire cable, 5 m (16.5’)
HI 779/10 6-wire cable, 10 m (33’)
HI 779/15 6-wire cable, 15 m (49.5’)
|
| Cable, Connection, For Hi 931002 | | |
| To connect pH and ORP process controllers to the HI 931002 simulator and perform all calibration procedures.
HI 7862/1 HI 931002 connection cable, 1 m (3.3’) Cable, Connection, with one screw-cap connector at one end, dia 5 mm (0.2’’)
HI 778P/1 Cable for electrodes with screw-cap connector, 1 m (3.3’)
HI 778P/3 Cable for electrodes with screw-cap connector, 3 m (9.9’)
HI 778P/5 Cable for electrodes with screw-cap connector , 5 m (16.5’)
HI 778P/10 Cable for electrodes with screw-cap connector , 10 m (33’)
HI 778P/15 Cable for electrodes with screw-cap connector , 15 m (49.5’)
HI 778P Cable for electrodes with screw-cap connector, 100 m (333’)
|
| Cable, Connection, 3 Mm (0.12') Dia. With A Screw-Cap | | |
| connector at one end. The other end can be free or provided with a BNC, DIN or US standard connector.
- HI 7854/1 Connection cable with screw-cap connector, 1 m (3.3’)
- HI 7854/3 Connection cable with screw-cap connector, 3 m (9.9’)
- HI 7854/5 Connection cable with screw-cap connector, 5 m (16.5’)
- HI 7854/10 Connection cable with screw-cap connector, 10 m (33’)
- HI 7854/15 Connection cable with screw-cap connector, 15 m (49.5’)
- HI 7855/1 Connection cable with screw & BNC connectors, 1 m (3.3’)
- HI 7855/3 Connection cable with screw & BNC connectors, 3 m (9.9’)
- HI 7855/5 Connection cable with screw & BNC connectors, 5 m (16.5’)
- HI 7855/10 Connection cable with screw & BNC connectors, 10 m (33’)
- HI 7855/15 Connection cable with screw & BNC connectors, 15 m (49.5’)
- HI 7856/1 Connection cable with screw & US connectors, 1 m (3.3’)
- HI 7856/3 Connection cable with screw & US connectors, 3 m (9.9’)
- HI 7856/5 Connection cable with screw & US connectors, 5 m (16.5’)
- HI 7856/10 Connection cable with screw & US connectors, 10 m (33’)
- HI 7856/15 Connection cable with screw & US connectors, 15 m (49.5’)
- HI 7857/1 Connection cable with screw & DIN connectors, 1 m (3.3’)
- HI 7857/3 Connection cable with screw & DIN connectors, 3 m (9.9’)
- HI 7857/5 Connection cable with screw & DIN connectors, 5 m (16.5’)
- HI 7857/10 Connection cable with screw & DIN connectors, 10 m (33’)
- HI 7857/15 Connection cable with screw & DIN connectors, 15 m (49.5’)
|
| Cable, Connection, 3 Mm (0.12') Dia. With A BNC Connector | | |
| - HI 7858/1 Connection cable with BNC & BNC connectors, 1 m 3.3’)
- HI 7858/3 Connection cable with BNC & BNC connectors, 3 m (9.9’)
- HI 7858/5 Connection cable with BNC & BNC connectors, 5 m (16.5’)
- HI 7858/10 Connection cable with BNC & BNC connectors, 10 m (33’)
- HI 7858/15 Connection cable with BNC & BNC connectors, 15 m (49.5’)
- HI 7859/1 Connection cable with BNC & DIN connectors, 1 m (3.3’)
- HI 7859/3 Connection cable with BNC & DIN connectors, 3 m (9.9’)
- HI 7859/5 Connection cable with BNC & DIN connectors, 5 m (16.5’)
- HI 7859/10 Connection cable with BNC & DIN connectors, 10 m (33’)
- HI 7859/15 Connection cable with BNC & DIN connectors, 15 m (49.5’)
- HI 7860/1 Connection cable with BNC & US connectors, 1 m (3.3’)
- HI 7860/3 Connection cable with BNC & US connectors, 3 m (9.9’)
- HI 7860/5 Connection cable with BNC & US connectors, 5 m (16.5’)
- HI 7860/10 Connection cable with BNC & US connectors, 10 m (33’)
- HI 7860/15 Connection cable with BNC & US connectors, 15 m (49.5’)
- HI 7861/1 Connection cable with BNC conn. & spade lug, 1 m (3.3’)
- HI 7861/3 Connection cable with BNC conn. & spade lug, 3 m (9.9’)
- HI 7861/5 Connection cable with BNC conn. & spade lug, 5 m (16.5’)
- HI 7861/10 Connection cable with BNC conn. & spade lug, 10 m (33’)
- HI 7861/15 Connection cable with BNC conn. & spade lug, 15 m (49.5’)
|
| Cable, PC Connection | | |
| RS232 serial cables to connect a PC to any HANNA meter provided with RS232 serial port. |
| Cable, USB PC Connection | | |
| USB interface cables.
HI 7698281 USB PC connection cable for HI 9828
HI 920013 USB cable for PC connection (excluding HI 9828, use HI 7698281 instead)
|
| Cap, Protective, For Photometers | | |
| Protects measurement cell of photometers from dust, liquid or any other damaging material, when not in use.
HI 740095 Protective cap for photometer measurement cell (2 pcs)
|
| Cap, Sintered, For RH Probes | | |
| Sintered cap for protecting the sensors of hanna instruments® rh probes in harsh environments.
hi 710011 sintered cap
|
| Carrying Case, Rugged | | |
| Rugged carrying case for photometers and turbidity meters with pre-cut sponge to fit instrument, reagents and apparatus. 381 x 311 x 108 mm (15 x 12.2 x 4.2’’).
HI 740218 Carrying case for portable photometers and turbidity meters
HI 740222 Carrying case for HI 832xx series
Rugged carrying case for general use. 340 x 230 x 90 mm (13.4 x 9.1 x 3.5’’)
HI 710031 General rugged carrying case
|
| Rugged Carrying Case With Thermoformed Tray | | |
| Complete with calibration screwdriver and hi 7030m calibration solution. 340 x 230 x 90 mm (13. 4 x 9. 1 x 3. 5’’).
Hi 721313 kit for hi 8733 and hi 8633
|
| Rugged Carrying Case With Thermoformed Tray For Hi 9025 | | |
| Hi 721317 carrying case for portable, waterproof and printing meters rugged carrying case for hi 93703 turbidity meter, complete with calibration and cleaning solutions, tissues and cuvets. 340 x 230 x 90 mm (13. 4 x 9. 1 x 3. 5’’)
Hi 731313 maintenance kit for hi 93703
|
| Rugged Carrying Case For HI 93102 And Hi 93114 | | |
| Rugged carrying case for HI 93102 and HI 93114, complete with calibration and cleaning solutions, tissues and cuvets. 340 x 230 x 90 mm (13.4 x 9.1 x 3.5’’).
HI 731327 Maintenance kit for HI 93102 and HI 93114
Rugged carrying case with thermoformed tray for chemical test kits. The tray allows orderly placement of the reagents in each test kit.
HI 740098 Carrying case for HI 3813
HI 740099 Carrying case for HI 3814
HI 740100 Carrying case for HI 3816
HI 740101 Carrying case for HI 3817
HI 740102 Carrying case for HI 3819
HI 740103 Carrying case for HI 3821
HI 740104 Carrying case for HI 3823
HI 740105 Carrying case for HI 3825
HI 740106 Carrying case for HI 3827
HI 740107 Carrying case for HI 3828
HI 740108 Carrying case for HI 3837
HI 740115 Carrying case for HI 3835
HI 740197 Carrying case for HI 3810
HI 740201 Carrying case for HI 3822
|
| Soft Carrying Case For Hi 9040 Type Thermistor Thermometers | | |
| Hi 710002 soft carrying case for portable thermistor thermometers soft carrying case for hi 9214 stick PH meter and any pocket meters, such as piccolo and conmet. 230 x 100 x 50 mm (9. 1 x 3. 9 x 2’’).
hi 710003 soft carrying case for hi 9214
|
| Soft Carrying Case For Hi 93510 And Hi 955501 Housings | | |
| Hi 710004 soft carrying case for hi 93510 housing soft carrying case for hygrocheck®.
hI 740203 soft carrying case for hygrocheck
|
| Case Protective | | |
| Protective case for portable meters.
HI 710018 Protective case for HI 93530N housing
HI 710019 Protective case for HI 93510N housing with probe
HI 710020 Protective case for HI 9040 housing with probe
HI 710021 Protective case for HI 9060 housing
HI 710022 Protective case for HI 8424 housing
|
| COD Test Tube Adapter | | |
| HI 740219P C.O.D. test tube adapter (3 pcs) Connector
Connectors to repair or customize the probe connection cables.
HI 740116 BNC connector (2 pcs)
HI 740117 DIN connector (2 pcs)
HI 740118 US standard connector (2 pcs)
HI 731323 Phono style plug with 1 m (3.3’) cable and wire |
| Cover For Battery Compartment | | |
| Spare battery covers for portable and pocket meters.
- HI 740002P Battery cover for Checker (10 pcs)
- HI 740003P Battery cover for Checktemp (10 pcs)
- HI 740004P Battery cover for Checktemp 1 (10 pcs)
- HI 740005P Battery cover for Checktemp 2 (10 pcs)
- HI 740006 Battery cover for Conmet
- HI 740007P Battery cover for HI 9040 casing (10pcs)
- HI 740009P Battery cover for HI 9025 casing (10 pcs)
- HI 740011P Battery cover for Piccolo+ (10 pcs)
- HI 740013P Battery cover for HI 9214 casing (10 pcs)
- HI 740014P Battery cover for HI 98810 casing (10 pcs)
- HI 740015P Battery cover for HI 99551 casing (10 pcs)
- HI 740016P Battery cover for HI 99550 casing (10 pcs)
- HI 740017P Battery cover for Hygrocheck (10 pcs)
- HI 740018P Battery cover for portable photometers (10 pcs)
- HI 740019P Battery cover for C 200 series (10 pcs)
- HI 740020P Battery cover for HI 99104 (10 pcs)
- HI 740021P Battery cover for Piccolo (10 pcs)
- HI 740022P Battery cover with O-ring for waterproof testers (10 pcs)
- HI 740207P Battery cover for HI 93703 (10 pcs)
|
| Cube, Color For CTK | | |
| Spare comparison cubes for colorimetric chemical test kits.
HI 3824-99 Color cube for ammonia test kit
HI 3830-99 Color cube for bromine test kit
HI 3831-99 Color cube for chlorine test kit
HI 3832-99 Color cube for iodine test kit
HI 3833-99 Color cube for phosphate test kit
HI 3834-99 Color cube for iron test kit
HI 3874-99 Color cube for nitrate test kit
|
| Cradle, Docking | | |
| Docking cradle for quick and easy placement of your instrument for PC connection.
HI 143001 RS232 communication cradle complete with Windows® compatible software for HI 143 T-logger.
HI 143002 USB communication cradle complete with Windows® compatible software for HI 143 T-logger. |
| Cuvet | | |
| The glass cuvet is the most sensitive part for taking accurate measurements with photometers and turbidity meters. It is important that the cuvet is always clean and without scratches.
HI 731321 Glass cuvet for HI 937xx portable meters & HI 832xx series (4 pcs)
HI 731331 Glass cuvet for HI 95 and 96 series (4 pcs)
HI 731311 Glass vial with cap for HI 93214 (5 pcs)
|
| Cuvet, Cleaning Cloth | | |
| These non-abrasive cloths are ideal to wipe measurement cuvets of photometers and tubidity meters, without damaging the cuvet surface.
hi 731318 cuvet cleaning cloth (4 pcs)
|
| Electrode Holder | | |
| Cantilever stand with a large steel base provides greater stability and flexibility, and holds up to 3 electrodes in any position.
HI 76404 Electrode holder for pH 209 type bench meters
HI 76405 Electrode holder with steel base
HI 76405A Cantilever arm
HI 76405C Steel base for HI 76405
HI 740035 Electrode holder and plastic beaker for HI 207 and HI 208
|
| Industrial By-Pass Loop Electrode Holder Configuration. | | |
| Designed for use in a bypass loop configuration.
Hi 60545 electrode holder for by-pass loop configurations |
| Industrial Electrode Holder For In-Line Installation | | |
| Two models are available,depending on the electrode thread. Made of fiber-glass reinforced polypropylene, these holders perfectly fit the relevant HANNA pH and ORP electrodes.
HI 6054B Electrode holder for in-line installation, 3/4x16UNF thread
HI 6054T Electrode holder for in-line installation, PG 13.5 thread
HI 60542 Electrode holder for in-line direct pipe installation, PG 13.5 thread
|
| Electrodes For Testers, Spare Parts | | |
| - HI 73106 Spare electrode for HI 98106 and HI 98107
- HI 73108 Spare electrode for HI 98108
- HI 73120 Spare electrode for HI 98120
- HI 73127 Spare electrode for HI 98121, HI 98127, HI 98128, HI 98129 and HI 98130
- HI 73201 Spare electrode for HI 98201
- HI 73202 Spare electrode for HI 98202 and HI 98203
- HI 1281 Spare electrode for Watercheck and Watercheck 1
- HI 1282 Spare electrode for Agritest and Agritest 1
|
| Fast Tracker (Tag Identification System) | | |
| I-Button Tags To Be Used With Fast Tracker™ Compatible Meters.
Hi 920005 5 Tag Holders With Tags
|
| Fuse | | |
| HI 70490P 400 mA, 5 x 20 mm fuse (10 pcs)
HI 740136P 1 A, 5 x 20 mm fuse (10 pcs)
HI 740137 1 A, 5 x 20 mm fuse (6 pcs)
HI 740138P 2 A, 5 x 20 mm fuse (10 pcs)
HI 740139 2 A, 5 x 20 mm fuse (6 pcs)
HI 740214 5 A, 5 x 20 mm fuse (1 pcs)
HI 740215 5 A, 5 x 20 mm fuse (6 pcs)
|
| Holder For Level Controller Bars | | |
| The hanna level controllers require measuring bars and this bar holder, which incorporates the amplifier circuitry to operate the controllers.
hi 7874 bar holder and level transmitter
|
| Hose | | |
| LDPE hose to be used with BL dosing pumps. Different lengths are available.
HI 720029 LDPE hose, 3 m (9.9’)
HI 720030 LDPE hose, 10 m (33’)
HI 720031 LDPE hose, 50 m (165’)
HI 720032 LDPE hose, 100 m (333’)
|
| Ink Cartridge For Built-in Printers | | |
| Spare ink cartridge for bench meters with built-in printer.
Hi 710033 ink cartridge for bench meters with built-in printer
spare ink cartridge for portable meters with built-in printer.
Hi 710035 ink cartridge for portable meters with built-in printer
|
| Key For Testing Thermometer Calibration | | |
| Allows a quick calibration check of the thermistor thermometers. Simply connect the key to the meter and verify that reading is within the key value ±0.4°C (or ±0.8°F). If not, contact the nearest HANNA instruments Customer Service Center for recalibration.
Test keys for thermometers using an HI 762 series probe.
HI 762-18C Test key at -18°C
HI 762000C Test key at 0°C
HI 762070C Test key at 70°C
HI 762-004F Test key at -0.4°F
HI 762032F Test key at 32°F
HI 762158F Test key at 158°F
Test keys for thermometers using an HI 765 series probe.
HI 765-18C Test key at -18°C
HI 765000C Test key at a 0°C
HI 765070C Test key at 70°C
HI 765-004F Test key at -0.4°F
HI 765032F Test key at 32°F
HI 765158F Test key at 158°F
|
|
|
|
|
| For more information attatched a pdf |
|
|
Calcium Carbon Dioxide Chloride | |
|
|
|
| For more information attatched a Pdf |
|
|
|
|
|
|
| For more information attatched a pdf |
|
|
Iodide Lead/Sulfate Nitrate | |
|
|
|
| For more information attatched a pdf |
|
|
Potassium Silver/Sulfide Reference | |
|
|
|
| For more information attatched a pdf |
|
|
Titratable Acids Mini Titrator And PH Meter | |
|
|
|
| |
|
|
DO Probe With Protective Sheath | |
|
| |
| |
|
|
Soft Carrying Case For Hygrocheck | |
|
| |
| Hi 740203 soft carrying case for hygrocheck |
|
|
Key for HI 141 Magnetic Start | |
|
| |
| Hi 740221 key for hi 141 magnetic start |
|
| |
|
Our Products
Bench & Table Top Instruments Data Acquisition Systems Digital Indicators Controllers Pocket Instruments Portable Instruments Sensors and Electrodes Transmitters & Transducers Metallurgical Instruments calibrators Our New Products Cables - HI 7854/1 Cables - HI 7855/1 Cables - HI 7856/1 Cables - HI 7857/1 Cables - HI 7858/1 Cables - HI 7861/1 Cables - HI 778P/1 Solid State Electrodes Liquid Membrane Electrodes Gas Sensors Reference And Combination Electrodes Combination Electrodes HANNA ISE Standards Ionic Strength Adjusters (ISA) HANNA Accessories Custom-Made Solutions pH And ORP Solutions Material Safety Data Sheet PH Technical Calibration Solutions Technical Solutions For Each Point Of The PH Scale. HANNA Combo Kits PH Millesimal Calibration Solutions Millesimal Calibration Solution Sachets 1.68 Buffer Solution 4.01 Buffer Solution 6.86 Buffer Solution PH Standard Calibration Solutions 10.01 Buffer Solution General Cleaning Turbidity Standard Solutions Color Graphic Display Portable Meters Precision Instruments For Lab And Field Applications. Spot Check Directly In Soil With This Ultra Portable Advanced Bench Meter With An Extended Range EC USP Mode EC/TDS/NaCl And PH/MV Meter Auto-ranging EC, TDS, NaCl, Temperature Meter EC And Resistivity Meter Conductivity Meters Industrial Grade EC Meter With USP Rechargeable Batteries With Inductive Charger EC/TDS/NaCl/ C Meters Portable Logging Conductivity Meters Direct Measurement Kit EC And TDS Meters Multi-range Conductivity Meters EC, TDS And Temperature Meters TDS And EC Meters TDS Meter MS/TDS Meter Waterproof With Amperometric Technology pH/Conductivity/TDS Testers Stick Conductivity Meter EC Tester EC/TDS Tester TDS Tester EC And TDS Testers EC/TDS Testers Reaches Beyond The Average Tester Conductivity And TDS Testers Accurate, Affordable Readings PH/ORP/EC Meter Water Hardness/Softness Tester Water Purity Testers EC/TDS Meters EC / TDS / Temperature Monitors PH/TDS/Temperature Monitor Conductivity Calibration Solutions 84 Scm Cal Solution 5000 cm Cal Solution 111800 CM Cal Solution TDS Calibration Solutions Powerful Customization, Accurate Analysis Quick Change Automatic Titration Systems Total Titratable Acidity Titrator HI 84431 Total Titratable Alkalinity Titrator Free And Total Sulfur Dioxide Titratable Total Acidity Mini Titrator Dissolved Oxygen Meters Designed For Aquaculture Cutting Edge Technology Dissolved Oxygen And BOD Meter DO Meter Industrial Grade Portable With Extended Range Printing And Logging Dissolved Oxygen Meters Extended Range Dissolved Oxygen Meters Dissolved Oxygen Meter HI 9142 Manual Calibration Dissolved Oxygen Meter Dissolved Oxygen Meter Simplified DO Measurement Dissolved Oxygen Meter With Galvanic Probe For Fish Farming DO Probes And Accessories Thinner, Lighter DO Probe For Laboratories Printing And Logging Thermo-hygrometers Rugged Hygrometer Data-logging Thermo-Hygrometers Compact Thermo-Hygrometer Relative Humidity And Temperature Relative Humidity Probe CE Mark Definition And Compliance Electro-Magnetic Interferences (EMI) IP 67 Heavy-Duty Construction Bar, Stir Bars For Magnetic Stirring Base For Checktemp Base For HI 76405 1.5 V AA Battery 3.6 V AA Lithium Battery Battery, For Amphel Electrodes Battery, Inductive Chargers Beaker Blades, For Meat PH Electrodes Boot, Shockproof Boot, Shockproof Rubber Boot For Portable Meters Bottle for D.O. Analysis Bottle, Polyethylene Bottle, Polyethylene, Dropper Bottle, Polyethylene, FDA Compliant Bracket For Installation Of Process Meters Cable, 6-wire Cable, Connection, For Hi 931002 Cable, Connection, 3 Mm (0.12') Dia. With A Screw-Cap Cable, Connection, 3 Mm (0.12') Dia. With A BNC Connector Cable, PC Connection Cable, USB PC Connection Cap, Protective, For Photometers Cap, Sintered, For RH Probes Carrying Case, Rugged Rugged Carrying Case With Thermoformed Tray Rugged Carrying Case With Thermoformed Tray For Hi 9025 Rugged Carrying Case For HI 93102 And Hi 93114 Soft Carrying Case For Hi 9040 Type Thermistor Thermometers Soft Carrying Case For Hi 93510 And Hi 955501 Housings Case Protective COD Test Tube Adapter Cover For Battery Compartment Cube, Color For CTK Cradle, Docking Cuvet Cuvet, Cleaning Cloth Electrode Holder Industrial By-Pass Loop Electrode Holder Configuration. Industrial Electrode Holder For In-Line Installation Electrodes For Testers, Spare Parts Fast Tracker (Tag Identification System) Fuse Holder For Level Controller Bars Hose Ink Cartridge For Built-in Printers Key For Testing Thermometer Calibration Ion Selective Electrodes Calcium Carbon Dioxide Chloride Cupric Cyanide Fluoride Iodide Lead/Sulfate Nitrate Potassium Silver/Sulfide Reference Titratable Acids Mini Titrator And PH Meter DO Probe With Protective Sheath Soft Carrying Case For Hygrocheck Key for HI 141 Magnetic Start Portable New Products Bench top new products PH indicators new products Ph Testers Digital Refractometers Multiparameter Bench Meter Mini Panel Mounted Controllers Mini Liquid Level Controllers NEMA Enclosures Panel-Mount Control Probes & Accessories Turbidity Turbidity Meter Accessories PCA Series Analyzers
 Product
Showroom View all our products / services as a slide show. play now
|
